Vacuum Cleaners Discussions

Hi. I have an almost 7-year old Beam Serenity Plus that I use at my home.



It has been a good vacuum but now I notice it doesn't work as well as before. When I use it now, the vacuum flickers on and off every 20 seconds for some reason. I find that I have to press up on the top part of the vacuum tube, where the plug for power from the vacuum head fits in. I have recently took a look at the plug and found one of its pins is rusted badly.



The original pin colour is yellow, so you have an idea of how bad the rust is. The vacuum itself is still in good shape, so does anybody know how I can get this rust off? I find it a bother to throw away an otherwise perfectly good vacuum.

Thanks for the help.

EDIT: I copied a link and pasted it here for the pictures, but the pictures didn't embed. I then found the attach picture button, so that's why I edited this post.

The pin is burnt, not rusted, you'll need to replace both the cord on the p/n and the receptacle in the hose end.

What causes this is disconnecting the hose from the hose from the wand without turning the p/n off first.

Wow! Vacuuman you're the man. Quick question -- are central vac hose ends easily replaceable? It seems, or so we are told, in like cases regarding portable vacs, that the entire hose hose to be replaced.

Thanks,

Venson

You take the end apart, and replace the wiring harness inside it. Just take the screws out of the side of the housing, and it comes in half, and is pretty self explanatory from there.

Thanks guys for your speed replies. I will try everything that was suggested here and that should solve my problems.

Venson and Vacuuman made excellent points.  Just another thought on cleaning the rust/burn marks:  Soft steel wool.  Again, only if the prongs are intact and not loose.

Carmine D.