Vacuum Cleaners Discussions

Hi,

I just won a Eureka Model 260 from Ebay. Does it take the regular round eureka belt? Also does anyone know what amp motor is in it and are new ones available. Even a higher amp motor? This is a two speed automatic with a green bag and white trim with gold around the light. Any info on this model would be appreciated. Some additional questions, I would like to try and restore this to be a daily driver.

The brush roll has the square ends. Would a vibra groomer II with square ends work?

Would the new sanitaire wheels that are readily available work on this model?

The bag is in excellent shape according to the pictures, but may need a new gasket or gasket  ring and tube. I know these are available for sanitaires and am assuming this would work on the 260?

I purchased a new cord sleeve for a new cord (it has a hoover convertible cord on it.) I also have a new two speed switch for it.

What size motor is in this model? Are new motors available? even one with a higher amp. (must be a two speed)

Thank You for any help you can give me

Bud Mattingly

Hello Budmattingly:

Nice find/buy.  It takes the same round belt that all the EUREKA/Sanitaires of this vintage use.  Readily available.  I suspect your model is vintage 60 ish.  The brush roll is called a "disturbulator" if my terminology is correct.  Gaskets for the bag coupling and motor housing can be easily fabricated, if the need be.   I have to second MH's motion.  Keep it as original as possible. Use to your heart's delight.  It will make you proud!  Just curious: Does it have a dust cloth/paper bag zipper unit?

Carmine D.

  Thank you both for your help. It does have a zippered cloth nylon outer bag that takes the f & g paper bags. It has a bag latch like the commercial sanitaires and not the two screw coupling. It is green with white trim and gold around the light. Someone else told me it probably was the Eureka 50th anniversary edition, since the light had the gold trim. From the pictures, it seems like its had little use.

Bud

Hi Bud,

I've been trying to be good and lessen my "shopping" but I couldn't help not keeping an eye on that Eureka the whole time it was up for auction.  Nonetheless, I opted to snatch a Westinghouse "Stratovac" canister that turned up because I knew I probably  wouldn't see another of for a good while.  Good thing I guess since the final price on your upright turned out to be about twice what it sold for when new. 

The great thing though is that it sets a stunning example.  It's nearing the fifty year mark and it's running, looking good and relatively  solid.  By the way, I believe I saw a set of attachments that may fit it also on eBay.

Might be wrong but I think your Eureka goes back far enough to be part of the line the Eureka "Golden Crown" canister came out of in the very, very late '50s or very early '60s.  Paint color and gold  trim are the same idea.  Eureka had a lot going on at the time including the Vibra-Beat canister.

Best,

Venson

Hi Venson,

I too saw the attachments and bought them last night. I paid more than I should have for those as well, but I had never seen attachments for the top of the Eureka before and they looked almost unused as well. When I receive the vacuum, I am going to have it serviced at a vacuum shop I have dealt with for years. The Eureka has a hoover cord on it, which is in good shape, but I found the original cord sleeve (only had 1 left) on the internet and will have a new cord with that sleeve put on it. I also  have a brand new two speed switch that I had bought years ago to fit the square handle as well. I actually had a friend who's mother had a Eureka Twin Power Automatic, which had that square handle. At the time the square handle and parts were still available, In my opinion, that was the nicest and most well made handle, Eureka ever made for their uprights. This was in the early 70's, so I bought a new Eureka Twin Power and had a new square handle put on it instead of the round handle it came with. That probably was my favorite vacuum of all time....unfortunately I was young and traded it in when the new Eureka ESP's came out. Live and learn.......

Bud

budmattingly wrote:

Hi Bud:

You might be right on.  EUREKA is probably 1909, so the 50th would be 1959 [As Venson said].  The attachments, while they don't work very well on these models, are good to have with the vacuum.  More value added.

BTW, when you have it, check the amperage on the bottom of the machine.  Should have a small metal plate on the underside with model, motor specs, and place of production.

WRT cord and protector, it's not uncommon for repairs on the old EUREKA upright cords to use HOOVER sleeves [protectors] with straight end generic cords. 

Carmine D.

Bud;

Your vacuum cleaner would be from the late 50's.  I would suggest that you do not change parts from the original design, since you are a vacuum collector.  Check the disturbulator and make sure the bristles are adequate length.  This design configuration of the bristles made for a very good brushroll/agitator at the time.  It helps in removing alot of the deep down dirt, in the carpeting.  The rear wheels, found on some of the underside of Sanitaires are not going to fit the Eureka, because they are larger than the Eureka's wheels.  The axle is also different from later Eureka/Sanitaires.  The motor amperage of your Eureka should be 3.5.  This vacuum cleaner cleans very well and is not as loud as present day Sanitaires of similar design.

Like I said earlier, try to stay close to original as possible.  You paid a mint for this machine.

Thank You all for the information. I do understand about keeping it as original as possible. To do this, how do you sanitize the brush roll, wheels, etc?

budmattingly wrote:
Hi Bud,

My best suggestion is to do nothing.  If you mean bacteria removal, there is no actual way to fully "sanitize" a used vacuum unless you totally dismantle it and still no way to render it totally or even near germ free.  As well, there is nothing to be gained except a lot of work and possible problems. 

However, if you want to clean the machine's underside up a little . . .

If you also own a vacuum with a blower, attach the hose and crevice tool and blow away any dust, cobwebs, etc., that may be found in the recesses on the front wheels. Use a natural bristle brush or even a clean paint brush  to get into wheel recesses.  Also, since you'll probably want to install a fresh drive belt,  remove the plate covering the fan chamber plus the machine's belt and brushroll and blow out the brush chamber.  You can use the brush I mentioned here as well to loosen dust that doesn't easily blow away.  This is a job better done outdoors or in a workshop.

[Please note that my not making mention of complete removal of the cleaner's wheels is totally deliberate.]  Moisten a paper towel with a little window cleaner and turn the wheels with your thumb as you use your fingers and the moistened toweling to quickly remove any foreign matter like dust or shampoo residue.  

The wooden "disturbulator" is not meant to be exposed to water.   A stiff brush with natural or plastic bristles may be helpful in dislodging adherent dust and dirt between the tufts of bristles on the brushroll.  If there is black residue that sometimes develops on a brushroll, do no more than LIGHTLY moisten a cloth or paper towel with window cleaner or a spray cleaner like Fantastik and clean it as best you can.

As far as collectibles go, clean up is a good thing only to the extent that original parts and finishes are not altered or damaged by over-cleaning.

Best,

Venson

Hi Bud:

I'm going to take a little different tact than Venson, tho I wholeheartedly agree with everything he says.

For the really bad vintage vacuums, I have a "swat" method of cleaning.  Dismantle completely and submerge the parts, even metal, in hot water in a slop sink and brush clean.  Of course, nothing electrical nor the cloth bags and paper filters.  Foam filters, rubber gaskets, even felt are fine for this type of cleaning.  But use care due to their fragility.  After these are completely clean, dry thoroughly and even use a blower/held held hair dryer. 

The bag, for example, tho zipper and still clean and in good shape, may hold odors from time and lack of use.  The swat cleaning is fine.  Keep the zipper open when submerged.  After cleaning, dry thoroughly and then again with the hair dryer.  Coat the zipper with a light amount of machine oil.  Sewing machine oil is perfect.  Work the zipper a few times and still leave open until thoroughly dry.  Clean and sanitized.  A little fragrance using an eye dropper on the F&G new paper bag and you're good to go.

I have even dismantled the HOOVER agitators and submerged in water and brushed clean to remove all the inside and outside dirt and gunk caked on for years and years.  Works fine if dried thoroughly.  I use this method too as a precursor to sand and paint, if the agitator is already rusted, as many are at times from laying in basements and garages.

Good luck.

Carmine D.

Bud
I've been using a hand Steam Cleaner on many of my parts to dislodge grime. Because the steam evaporates immediately, I believe you might be able to use it on metal parts. PM me if you want more info.
Lucky