Vacuum Cleaners Discussions |
|
budmattingly
Location: Middletown Ohio
Joined: Feb 8, 2008
Points: 60
|
|
Eureka Model 260
Original Message Dec 29, 2008 8:28 pm |
|
Hi, I just won a Eureka Model 260 from Ebay. Does it take the regular round eureka belt? Also does anyone know what amp motor is in it and are new ones available. Even a higher amp motor? This is a two speed automatic with a green bag and white trim with gold around the light. Any info on this model would be appreciated. Some additional questions, I would like to try and restore this to be a daily driver. The brush roll has the square ends. Would a vibra groomer II with square ends work? Would the new sanitaire wheels that are readily available work on this model? The bag is in excellent shape according to the pictures, but may need a new gasket or gasket ring and tube. I know these are available for sanitaires and am assuming this would work on the 260? I purchased a new cord sleeve for a new cord (it has a hoover convertible cord on it.) I also have a new two speed switch for it. What size motor is in this model? Are new motors available? even one with a higher amp. (must be a two speed) Thank You for any help you can give me Bud Mattingly
|
budmattingly
Location: Middletown Ohio
Joined: Feb 8, 2008
Points: 60
|
|
Re: Eureka Model 260
Reply #14 Jan 17, 2009 7:29 pm |
|
Carmine their option was to Buy a new red sanitaire bag with the bag clamp that takes the f & g bags. My bag is mint other than the 2 small holes. I wanted to buy that bag and have them use the bag clamp and fill tube on my original bag. They said it would not work...One thing is the the bag retainer on the bottom of the sanitaire bag would have to be cut down as it will not fit in the slot on the bottom of the 260. The top of the bag clamp would work fine. I was really hoping this would be an easy fix.....
|
budmattingly
Location: Middletown Ohio
Joined: Feb 8, 2008
Points: 60
|
|
Re: Eureka Model 260
Reply #19 Feb 19, 2009 8:21 pm |
|
Carmine, it is the metal that surrounds the brush roll housing. The metal strips are fastened with screws every so often and go completely around the housing. This is the best I can describe it. I could email you a picture of the bottom if you want. My email address is rmattingly2@cinci.rr.com. Thanks, Bud
|
|
|