Vacuum Cleaners Discussions

Well, I got my first Dyson and I'm not sure I made the right choice.  I was selling vacuums at Snears when Dyson came to America and I was very familiar with the DC07.  Well, I bought a used DC14 from Craig's List...  I much prefer the simplicity of the DC 07, especially the way the wand and hose work.  That telescoping thing on my model is for the birds.

Anyway, I have a specific problem with mine.  The lady who owned it before me had a dog.  After cutting at least 2 pounds of her hair and white stuffing off the brushroll, I turned it on and it smelled awful!  Just line someone had vacuumed up wet dog hair.  In fact, someone had... there was dog hair caked all over the vacuum in the brushroll housing.  I cleaned it as well as I could... which isn't easy because of the fact that Dyson makes the vacuum so users can't remove their own belt/brushroll (very stupid if you ask me, but I'm sure they get a lot more money for service).  I worked around the brush roll and cleaned the cavity out.  Looks pretty good.  Then I took the filter, cyclone bin assembly, hose, wand, U-bend, and bottom plate to the bathtub for a good soak/scrub.

Does anyone have any advice on how to get the dog smell out of the rest of the vacuum... the part I can't take in the bath tub and wash?!

I don't think saving 300 dollars to buy used was worth all this trouble!

This thing sure looks weird sitting beside my Kirbys, Royals, and vintage Hoovers!

No matter what you do, the tell tale pet hair smell will remain.  It's the worse.  Save complete new replacement of the guilty components nothing works.  Cover it up a bit but its there until the world ends.  For a $100, you overpaid.  A visit to a local vacuum store or two may have been more fruitful.  The  DC07-s are making their way in for trade and repairs. Some even abandoned by owners who can't come up with do re me for repairs.  Store owners are happy after 3-6 months of collecting dust to get their money back out of them by discounted resales.

BTW, Fry's Electronics has new DC07-s All Floors on clearance for $289.  Once all these are sold, and it is dropping prices until they all are, the DC14-s will follow.

Carmine D.

Hi V.F. trust me that the whole machine has to come apart and be cleaned in a 2 bay sink,loaded with disinfectant,take it apart right down to the bare housings,i do it all day long.A dishwasher is also a good idea also if you have access to one.
Now you know why the machine was pretty cheap,the old owner could not put up with it any more,Just wanted to unload it, good luck on the repair what a nightmare these are to work on,

MOLE

Hi VF,

Wash whatever parts are readily accessible and then you might want to try picking up a tablespoon or two of borax before you start cleaning OR -- if you can find them -- a very small amount of moth crystals.  Borax generally lends to sweetening exhaust air.  Moth crystals provide a stronger effect and have usually helped de-funk some pre-owned vacuums I've acquired.  Back in the day, some manufacturers like Electro-Hygiene (which actually had a compartment for just this purpose built into some of its tank-type vacs and uprights), Royal, etc., recommended small amounnts of these -- no more than a couple of teaspoons -- to help kill odors in the machine.  This has worked for me in past.  I found after a few applications that most obnoxious odors were eliminated.

Being Dyson is bagless, you may need to dump in the crystals each time you clean until the smell is reduced or gone.  Again, in this situation, more is not better.  Merely use the couple of teaspoons of Paradichlorobenzene crystals suggested.  Also please note that this is a toxic material -- same stuff is used bathroom deodorizers and moth $#%* -- and should be stored out of the reach of children or pets.

Best,

Venson

Venson wrote:

Hello Venson:

Yes, back in the day.  Recall how all the new [old]  vacuums came with sprayers and de-motherizers.  The latter were inserted into the vacuums' exhausts [with a supply of moth crystals, sometimes even provided by the vacuum maker].  99.99999 % of the vacuum owners never used them.   Kirby continues a practice that was once an industry accepted standard.

Carmine D.

Hey Venson and Carmine,thanks for reminding me of this stuff,being a royal dealer i always had many packets of the moth crystals lying around the shop,Carmine is right no one ever used this feature,even the dealers never used it in the demo,All the BIG name door to door brands always had DEMOTHERS in their demo kits,Anyone remember the plastic or vinyl suit bags for suit storage,I had some ELECTROLUX ones .

Man those things weighed a ton,

A lot of this add on accesories were just  used as deal closers, But kirby has to take the #1 prize for the gizmo department,

B.T.W. service and repair have really stepped up in recent months,A sign of the times? i might need another bench guy soon, these 14 hour days are killing me...............

MOLE

CarmineD wrote:

Does Kirby include crystals with their vacuums?

mole wrote:

Most defintely MOLE man.  I'm hearin the same from the vacuum stores here in LV.  Hard times [read slow and dwindling cash flow] mean vacuum customers have to use, repair, and reuse.  Good time to have and sell replacement parts vice genuines too.  Customers like to save money now on such things.  Good time for sales of vacuum store brands and repairs and parts for all makes and models.   

Carmine D.