| Name |
bmwe0692 |
| Email Address |
private |
| AIM |
|
| YIM |
|
| ICQ |
|
 |
| Gender |
|
| Age |
|
| Location |
Iowa |
|
| Personal Quote |
"Have a great and glorious day" |
|
| Privileges |
Normal user |
| Rank |
 |
| Points |
79 |
| Number of Posts |
79 |
| Number of Reviews |
0 |
| Date Joined |
Dec 4, 2004 |
| Date Last Access |
Nov 6, 2011 9:52 pm |
|
 |
Re: Scored a CCR3000 - Carb needs Cleaning
#1 Apr 14, 2011 8:41 pm |
|
Not really up on 2-strokes. Is there a fuel shut off,that is partially closed? Primer bulb installed correctly?
Using that so called e-85 fuel? Canot think of anything else. Hope you get it running!
T.J.
|
 |
Re: Storm 5524 (Troy)
#2 Jan 20, 2011 7:52 pm |
|
First off REMOVE the spark plug!!! The motor might be storing up compression,when the paper comes loose with your hand in there,look out. As was mentioned use water to soften up the paper. Fashion a hook out of strong wire and work the softened paper out. Keep the paper wet and use the hook. Just a little space between the houseing and impeller will let you get bigger pieces out and free up the impeller.
Hope this helps
T.J.
|
|
|
Re: Tachometer & RPM
#3 Jan 15, 2011 12:02 am |
|
In using the laser tach, there must be an unobstructed view of
the piece of tape. If the tach gets interupted in "seeing" the tape,
the readings will be inaccurate. BTDT
T.J.
|
|
|
Re: Ariens 932027 drive belt falls off
#4 Jan 14, 2011 11:52 pm |
|
Does the drive plate wobble side to side when you try to move it by hand? Are the belt fingers on the motor
adjusted so there is about an 1/8" clearance between the belt and fingers? Is the belt correct for your blower?
Just a few ? off the top of my head Hope you find a cure for it!
T.J.
|
|
|
Re: Ariens STK 724 mod 932027 working fine then no drive front or back.
#5 Dec 31, 2010 11:46 am |
|
<BR><BR> 4. Might also look to see if there is any loose snow or water on the drive plate. The friction wheel and water don't like each other. Friction wheel likes to just slip on the drive plate. <BR><BR> Check all of the other suggestions.<BR><BR> Hope you get it back running.<BR> <BR> T.J.
|
|
