Abby's Guide to Projectors
Username Password
Home Discussions Reviews More Guides

Member Profile


DrBobDC2005

Name Robert Ebeling
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 1
Number of Posts 1
Number of Reviews 0
Date Joined May 16, 2009
Date Last Access May 16, 2009 7:35 pm
DrBobDC2005's last  
Re: 2000 6.5 HP Tecumseh lawn mower will not start
#1   May 16, 2009 7:32 pm
Here's how I fixed mine.  (Actually a neighbor was throwing it away so I hauled it home to see if I could fix it.  I did!)  At the bottom of the carb bowl is a nut.  Empty the tank of as much fuel as possible and remove this nut.  I believe it was a 7/16 socket.  Don't lose the gasket.  The nut is part of a threaded bolt that feeds fuel to the carb.  There are 4 holes in this bolt  that I cleaned with a combination of WD 40, a pin, and compressed air.  2 holes at the bottom that line up with each other.  You should be able to see daylight through it.  One inside the hollow bolt that I cleaned with air and WD 40 and one other one that goes diagonal at the very tip of the bolt.  It is small but there.  Done deal!
Projectors Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.