| Name |
R |
| Email Address |
private |
| AIM |
|
| YIM |
|
| ICQ |
|
 |
| Gender |
|
| Age |
|
| Location |
|
|
| Personal Quote |
|
|
| Privileges |
Normal user |
| Rank |
|
| Points |
3 |
| Number of Posts |
3 |
| Number of Reviews |
0 |
| Date Joined |
Jan 2, 2011 |
| Date Last Access |
Jan 13, 2011 9:43 am |
|
 |
Re: Ariens 924032 drive issues
#1 Jan 13, 2011 9:43 am |
|
Running great thanks, took care of yesterday's blizzard no problem. Not bad for a 31 year old machine that's only 7 HP!
|
|
|
Re: Ariens 924032 drive issues
#2 Jan 10, 2011 12:45 pm |
|
Ended up being a worn out wheel bushing which made the axle loose. The rattling noise was the 2 gears not quite connecting which explained why sometimes it would catch and sometimes it wouldn't.
|
 |
Ariens 924032 drive issues
#3 Jan 2, 2011 3:22 pm |
|
My 7 HP 924032 is having a hard time going into higher gears. In addition, when it goes in all gears it rattles a lot and doesn't drive without buckling. It catches for a second then doesn’t, over and over. I took the plate off the bottom and everything is connected, the motor runs great, I can see the drum spinning fine. The chain has a tiny bit of slack in it but not much. I can't tell if the rattling noise is coming from the 2 gears that might not be catching fully or from somewhere else. It’s a 1979 model that always starts first pull so fixing it would be great but as you can imagine I don’t want to drop a ton of dough on it. I tightened the drive disc adjustment nut (quite a bit actually) but the wheels didn't bind and just kept turning as I moved them. Any help would be appreciated.
|
|
