I have a 824/932101 that I have had issues with. The friction disc rubber was shredded, and the drive plate was all scored up. I have replaced all of this, however, the thing that I am really nervous about is the shift fork that hooks onto the friction disc assembly. This mounts into a hole in the frame. The problem I am forseeing prior to putting this all back together is there is a bit of play in this assembly and causes the shift fork rod to dislodge from the mounting hole and the fork will come off the friction disc assembly completely.
Anyone familiar with this issue and or the complete parts lineup for this and how to eliminate the play? I did find a flat washer when I removed the bottom panel. However, unsure if this is related.
Thanks for any help out there!
-=Kurt