| Name |
Tom |
| Email Address |
private |
| AIM |
|
| YIM |
|
| ICQ |
|
 |
| Gender |
|
| Age |
|
| Location |
|
|
| Personal Quote |
|
|
| Privileges |
Normal user |
| Rank |
|
| Points |
9 |
| Number of Posts |
9 |
| Number of Reviews |
0 |
| Date Joined |
Dec 23, 2005 |
| Date Last Access |
Feb 1, 2008 9:39 pm |
|
 |
Re: Ariens Sno Thro Won't Start
#1 Dec 5, 2006 7:16 pm |
|
The 1978 - 1979 932006's started with s/n 000101. The Tecumseh engine was an HS50 - 67008B. Looks like you have an original. The '79 - '80 unit used spec number 67008C, the Ariens s/n's started with 015001. They're both 24". (ST504)
|
|
|
Re: Tecumseh part number ????
#2 Jul 19, 2006 9:43 pm |
|
Tec - 31840 Stens - 520338
|
|
|
Re: ariens 1970 snowblower bolt removal friction disk
#3 Apr 5, 2006 7:48 pm |
|
Hold the hex shaft with another wrench.
|
 |
Re: TECUMSEH HM 100 MUFFLER GLOWIN RED MUFFLER BOLTS COMMING LOOSE
#4 Jan 12, 2006 5:46 pm |
|
richb,
Was there a muffler locking plate on the muffler at one time? That keeps the bolts from backing out. Post your spec number so someone can look up a possible p/n.
Is there play between the throttle shaft and carb body? You'll never get the carb set right if there's air getting around the throttle shaft. It will keep running lean and "hunting".
The Tec "dial indicator has an offset "foot" on it to allow contact with the piston, and a threaded collar that screws into the spark plug hole. To use a typical dial indicator you will have to remove the head to take measurements.
Take a close look at that carb and post that spec number and we'll see what other suggestions come up.
|
|
|
Re: ARIENS WHAT YEAR ?
#5 Jan 2, 2006 7:13 pm |
|
richb,
My old book shows:
1970 - 1971 910962 s/n 000001 & up
1971 - 1972 910962 s/n 021500 & up
1971-1972 910995 s/n 000001 - 080000
Looks like there's a few missing digits on the tractor s/n. Look real close, maybe they're stamped on the frame.
T
|
|
