Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

well folks a tied up the briggs rep and made him fess up on the sno engines.

there are 3 real horsepower ranges.

the small one is fron 6 to 8.5 horse...actually 8 horse i beleive not positive on this

the 9 to 12 horse units ...actually 12 horse

last is 13 horse  and it is closer to 14 horse

and almost all of them are cast iron bore.

the snappers are all cast iron  bore according to the tech.

thare have been no service manuals on the inteck engines since april of 2002,and there is no info on them that is any newer than that.

this is why there is so much controversey on it.

briggs never thought that they would have the success with the engine that they did,things just worked out real well for them.

they plan to get the numbers RIGHT for next season...and you guessed it ...it will be cubic inches not horsepower.

later chris

buttlint wrote:
Unfortunate to think those bone-heads over at Toro and Tecumseh are having a real big laugh at their customer's expense. That statement is just to close to the truth to actually be funny  Next piece of OPE I buy may be a Honda.

Rich,
It's not just Toro and Tecumseh having a laugh on anybody.
The thing is that there was a class action lawsuit that determined that things were going too be measured in cubic centimeters and not horsepower. Why?( Just look at the debates that were spawned on this forum and others in the recent past.) Horsepower was being jacked around so much...that it really didnt mean anything anymore.

Is Honda going too comply with the new labeling?

I'd suggest a new measurement of useful work rather than horsepower: "kegs of Molsons lifted per fortnight". At least the common man can identify with it, and when we've finished rating the engines, we drink the beer. Then we'll all be happy. No class actions suits to make some lawyers rich; some may need a new suit depending on where they upchuck the beer.

Highwind wrote: LMAO! 

     SS,

What about the Tec engines, do you think or know that Tecumseh was doing the same as Briggs.

I think that they were both doing the same.

                                                        Fred    

buttlint wrote:

Hi there Lint,

Yes, you are correct, it was just my frustration getting the best of me.  This problem is industry-wide, no question about it.  However, It still raises more questions in my mind.  Using Toro as an example since I know their products best, and they use Tecumseh engines, they sell 3 different 4-stroke 2-stage snowblowers.  They are 8 and 10 HP L-heads, and their top machine is an 11 HP OHV model.  The 8 is 318 cc's, the 10 is 358 cc's, and their 11 HP OHV engine is also 318 cc's.  If you look at that, how would the consumer know that the previously rated 11 HP engine, that now will be rated by CC's or cubic inches is supposed to be more powerful, will they call it a 318 cc OHV high output or something?  I was hoping Snowshoveler could have cornered a Tecumseh representative as well.  Although, we all know what the answer would be.

Personally I think changing to a different measurement ( CC, cubic inches, hogsheads, whatever) is stupid and highlights the problem even more. The basic problem is that the manufacturers are lieing. Coming up with a new way of measuring things just allows them to lie in a different way.

I don't care how big the cylinders are, I'm interested in the amount of useful work that is coming out the end of the engine, how much fuel is used and how long the engine will last running at its rated power. The measurements are simple and adequately defined in engineering circles. The problem seems to be the sales force is taught to do anything to make a sale including being dishonest.

Saying that B&S wasn't prepared for their popularity is just letting them off the hook. They are putting different horsepower stickers on the same engine, this is lying, pure and simple. If all they have are 8, 12 and 14 HP motors then that is what should be on the stickers and in the OPE manufacturer's catalogues.

Hi Nibbler,

I don't think it could have been any better stated than in your post  I also believe we should not be so quick to let the engine manufacturers off the hook and buy their ridiculous excuses, which is just a tap dance in my mind.  It sends the wrong message to them, and keeps the door open allowing them to continue to find different ways to deceive us. 

snowshoveler wrote:

Hi guys!

 No disrespect intended to Chris and sorry to be contrary but that just ain't so. The Snappers come with the 20G4140111E1 1which is most definitely an aluminum bore engine. Reference the "G" designation on the Briggs & Stratton web site where they tell you how to decipher spec #s.

One of the problems I suppose is that the Briggs tech. may not be familiar with each and every detail of each and every engine that each OPE builder is using. When I first got involved with researching this topic I got far more accurate information speaking with the OPE builders tech. Reference my first post in the thread " Conversation with Simplicity" and you will see that the Simplicity guy gave all the correct information during one phone call.

I believe it to be unfair to ask the engine manufacturer questions about an individual piece of OPE's power plant without supplying him with the spec #. There are simply to many variables in the manufacture of one displacement size engine.

Marc   

Don't know if I want to get into a "horsepower" debate as I feel like a boy scout selling cookies to a religious cult, and will end up with a handful of pencils, but I'll throw my $.02 in for fun.

Horsepower, by itself without the RPM at which that horsepower is made is prone to be played with. Engine makers should quote an RPM figure with it, and to be totally honest, with most of these small engines which are governed to run at a set max speed, they should quote HP at the governed running speed.

Ideally, I'd like to see a torque vs RPM curve for the engine, and they can put HP on there if they wish, but engines only produce torque and RPM. HP is a man-made concept to supposedly simplify comparison of engines. It appears that has been played with by the manufacturers.