Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I'm in SE Michigan, we just got like 8-10 inches. I bought a brand new Sears 8hp 27" model thanks to the advice here. I just went out to snowblow for the first time and had a terrible experience. Here are my random thoughts. Any comments or advice is greatly appreciated.

1. Upon unpacking the snowblower there was oil all over the thing. Is this normal for a new machine? It was a mess with oil everywhere. I checked the level and it seemed ok, but I had to wonder if they didn't obey the "this side up" when delivering.
2. One of my skid-plate shoes was bolted on so unbelieveably tight that they would NOT loosen. I had a perfect fit on the bolt, used all my might in a 250 lb body to get these stupid bolts loose, it would not budge. Now they bolts are stripped (literally the bolt schredded rather than turning)! I had to hammer the thing down to get it closer to the ground and I will never get that stupid bolt loose.
3. Started snowblowing for the first time, only about 60% of it goes where I want it to. Maybe it is windy today but this was just a terrible experience. It blows it right back up in the air and into your face, and all over the area just plowed!
4. After blowing, I still have 1-2" on my driveway, if I'm going to have to shovel anyway, I might as well return the dang thing!
5. This thing takes a ton of effort to manuvuer. Making 180 degree turns is like moving a tank. On a 26' wide driveway this is a major pain! Isn't there a way to release the self-propelled lock mechanism temporarily without having to unhook the wheel?
6. The chute coming out is made out of cheap plastic and I had to adjust it several times. Many times there was snow coming out between where the tilt mechanism at the top meets the chute. Isn't there a way to seal it?
7. Is there some recommended clothes to get for snowblowing? I can't believe how coated in snow I got.
8. Is there a recommended strategy that works best for taking on a 26' wide driveway?

I think a lot of these are related to just snowblowing in general and not specifically the model I got. Any advice? After this experience I'm thinking about just returning it and having someone plow my driveway for $100 a year instead.

This is the model I have:

Sears Craftsman

edited to make link work

Domino,

When I have to blow into the wind, I try not to blow the snow high. Angle the chute downward to blow horizontally or down in order to avoid snow blowing back into your face.

In regards to what to wear, I normally wear a few layers to keep warm with some breathable rain gear as the final layer to keep dry. Gloves, hat & some eye protection. I would recommended the eye protection if you're not wearing a ski mask. IMO, you'll never know what flys out the machine & things will never always go in the direction you're aiming.....

Marshall,

Nice gear, I could have use that in my pre-Ariens days when I had to be out there for 2 hours plus with a shovel for anything over 12", but with the Ariens, I'm only out there 45 minuts tops. Looks like the effort to put this on would be more than it's worth unless it's sub-zero weather or sub-zero wind chills.

Hi…

“1. Upon unpacking the snowblower there was oil all over the thing. Is this normal for a new machine? It was a mess with oil everywhere. I checked the level and it seemed ok, but I had to wonder if they didn't obey the "this side up" when delivering.”

Hmmm… maybe it’s not engine oil…? ..but that oily stuff that prevents metal from rusting? I wouldn’t expect this on a snowblower though…

“2. One of my skid-plate shoes was bolted on so unbelieveably tight that they would NOT loosen. I had a perfect fit on the bolt, used all my might in a 250 lb body to get these stupid bolts loose, it would not budge. Now they bolts are stripped (literally the bolt schredded rather than turning)! I had to hammer the thing down to get it closer to the ground and I will never get that stupid bolt loose.”

Time for new bolts/nuts… maybe put some “Anti-sieze” compund on the threads for EZ removal…

“3. Started snowblowing for the first time, only about 60% of it goes where I want it to. Maybe it is windy today but this was just a terrible experience. It blows it right back up in the air and into your face, and all over the area just plowed!”

Gotta’ try to work with the wind… or direct the snow so it’s not creating a plume high up…

“4. After blowing, I still have 1-2" on my driveway, if I'm going to have to shovel anyway, I might as well return the dang thing!”

Maybe give it another try first…

“5. This thing takes a ton of effort to manuvuer. Making 180 degree turns is like moving a tank. On a 26' wide driveway this is a major pain! Isn't there a way to release the self-propelled lock mechanism temporarily without having to unhook the wheel?”

I dunno’ about this blower… but I doubt it… try it with 1-wheel drive if it has that option…

“6. The chute coming out is made out of cheap plastic and I had to adjust it several times. Many times there was snow coming out between where the tilt mechanism at the top meets the chute. Isn't there a way to seal it?”

Doubt it… part of the design…

“7. Is there some recommended clothes to get for snowblowing? I can't believe how coated in snow I got.”

I use different clothing depending on conditions… if it’s cold and windy when using a blower… I wear a 1-piece coverall I got at Kmart… a face mask… gloves with glove liners… neck protection(scarf)… hat… so only my eyes are exposed… usually do not use goggles... my sons somestimes use a full-face snowmobile or motocross helmet…
Sometime ya' just get blasted and look like a snowman...

“8. Is there a recommended strategy that works best for taking on a 26' wide driveway?”

Start down the center blowing off to the side… then keep widening each pass… blow snow with the wind when possible…

“I think a lot of these are related to just snowblowing in general and not specifically the model I got. Any advice? After this experience I'm thinking about just returning it and having someone plow my driveway for $100 a year instead.”

There are better/worse brands/models… kinda’ get what you pay for…
Around here plowing costs at least $30 each snow event… and when THEY wanna’ show up…
Hope the next time it goes better for you !


Dave…

domino, Sorry your first time out was so unpleasant. It does sound like the crate was not always upright - causing the oil to leak - but it's strange you found the oil level is OK. I'd double check that. Assuming you're turning it the right way it sound like some gorilla at the factor cross-threaded the bolt but socked it down anyway with his air wrench. Sears should fix or replace at your home to make you happy.

As other have said for smooth pavement the skid and scraper should be adjusted so that the scraper is 1/8 to 1/4 inches about the ground. Find a nice flat area to do this and (important) make sure your tires are inflated properly first. No way it should leave 1-2" unless it's blowing back in behind you.

One wheel drive will make you machine easier to turn but you will lose half the traction and it will be harder to keep it going straight. I leave two wheels engaged all the time. Dry pavement is tough but I don't have a big problem turning on snow. Are you pushing down to lift the front of the machine when you turn?

Usually I like to start in the middle and work outwards blowing away from the area already done. However, If the wind's blowing across my drive I'll start upwind and work my way downwind blowing downwind all the time. Nevertheless if there's a swirling wind and powdery snow you will get snowed on no matter what you do.

I wonder if you are adjusting the deflector too low. For best performance I avoid going much lower than 45 degrees. Keep in mind that the snow comes off the impeller almost straight up and will increasingly lose velocity the more you deflect it. That being said my chute has an inner flap to prevent snow from coming out the joint. Hopefully with the bolt fixed, scraper set right, and a little better technique you'll be in good shape for the next snow. -Bob