Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Here on Long Island last two storms 5" to 7" snow quickly turned to slush.

I was using a Ariens 1128 and did so so by putting it into high (fast) gear to blow snow/slush.

Are Toro units any better in this sitation?

TIA

Kevin

PS Richie how was your 828LXE??

I'm sure you all know this,, and maybe you covered it and I missed it.  But made in America could and most of the time does only primarily mean , assembled in America.  The best example I can give is when I bought my first new Jeep.  You know Jeep famous American vehicle that practically help win WW2 single handid.  I had to do some digging but what I found was that 49% of the parts on that vehicle were from overseas.  Chrysler had to keep the content under 50 percent as that was the threshold that they could say something like "American made" and "Made in America" .. That may have all changed now and the things may be 90 percent overseas.  Who knows. 

Ben07

American made...Of my last eight cars, five were "American", three Japanese (Honda, Nissan, Acura), and one Sweedish (Volvo - owned by Ford).  Only two of the eight were "Made in the USA," the Honda and the Nissan...as for Toro, maybe they should paint them red, white, and blue instead of just red!

As for performance, my 826 has handled everything I have thrown at it for the past two seasons without a single "burp" (if you don't count sucking up the Sunday paper...but that wasn't the Toro's fault).  It blows the same left or right, and I see no need to question the quality and durability of the polymer (plastic to some) parts.  They don't flex, won't rust, and the snow doesn't stick to them.  The ground was warm for the last snowfall and by the time I got around to blowing there was a pretty good layer of wet, slushy snow along the bottom.  The 826 cleaned it right up.  Didn't throw it 40 feet but threw it far enough to get it out of the way.  A great machine...

LL

lland wrote:
Yeah, that 826 LE must really do a great job compared to the 828.  I have no doubt having 2" less width on the auger makes a nice difference especially when in deeper snow.  From your post, I'm glad to see you never had any surging issues with the engine.  I also agree with everything you posted