Since Sears thinks there parts do not break, they don't seem to carry some replacement parts. What I am looking for is the 22 tooth worm gear for snowblower model 536-918200. Part Number is 50223. I have looked all throu the internet and it is hard even to find a 22 tooth gear at all. Maybe just haven't looked in the right place? Even a good used one would be okay. If anyone out there can help, it would be very appeciated.

 Guys,

536 was Western Tool & Stamping, then AMF(Murray)

         Hope this helps!

                                                     Fred   

PS                  Go to:         www.edgeta.org/sears.htm       for a list!

Hi!DRLMN11

The guys have given you the info you need . Go to some of the internet parts houses and try to cross reference the part under Murray as the manufacturer instead of Sears or Craftsman.

Welcome to the forum. By the way I have heard that the worm and pinion should be replaced as a set where possible. There are some real pros on this board who will doubtless be able to advise you.

Marc

it seems that others are looking for this also

Looking for worm gear for sears snowblower

---

[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

---

Posted by Ron Bair on February 07, 2005 at 07:43:47 from (208.23.135.5):

Chewed up the bronze worm gear on my Sears snowblower
and I'm finding out that they are not available through the typical avenues. Anybody have any suggestions where I could find a replacement.
Snowblower # is 536.918200 and the bronze gear # is 50223.
Thanks

---

Follow Ups:

• Re: looking for worm gear for sears snowblower Dan H 13:33:02 02/18/05 (0)
• Re: looking for worm gear for sears snowblower JT 14:56:55 02/08/05 (0)
• Re: looking for worm gear for sears snowblower Bob - MI 07:13:07 02/08/05 (0)
• Re: looking for worm gear for sears snowblower willie j 04:55:19 02/08/05 (4)
  • Re: looking for worm gear for sears snowblower Ron Bair 06:00:04 02/08/05 (3)
    • Re: looking for worm gear for sears snowblower jakej 13:37:16 02/08/05 (2)
      • Re: looking for worm gear for sears snowblower Ron Bair 07:28:52 02/09/05 (1)
        • Re: looking for worm gear for sears snowblower jakej 08:57:44 02/09/05 (0)

---

here is what appears to be the "exploded" sdolution


 have the same blower and went through the same repair due to the floor model having grade 2 instead of shear bolts. I have found 2 gears which might work you will have to measure. www.lawnandgardenparts.com, in site search type worm gear a pictute and measurements looks a lot like the one I replaced. Its a MTD 717-0528. LOL link below

but it is only 20 tooth

SNOW THROWER GEAR BOX ACCESSORIES

 

 

 

 INDEX PAGE

Home | About Us | Ordering | Specials | Tracking | Email List | Contact Us

 

Copyright © 2000-2001 Flxtek, Inc. All rights reserved.  

Reproduction in whole or in part without written permission is strictly forbidden.

Disclaimer

sears parts does appear to sell it is is on thier web sight:::::::::::::::::::::Unless this is the wrong gear.


first search by model (using the model # 536-918200.; then go into the auger housing section by diagram or list. #38

SHAFT, OUTPUT	50465	36
GASKET, GEAR CASE	50466	37
GEAR, WORM	50223	38
KEY	26401	39

 Solara,

You are great!!

                                  Fred

Solara -"You Da Man"

Marc

On the Sears website, If you go ahead a put the worm gear into your shopping cart, it tells you it's not available for order. Bummer!!

We're Sorry. Due to unavailability, the following parts can not be ordered.

Part Number:	Part Description:	Model Number:
50223	GEAR, WORM	536918200

Good try though, hopefully someone can come up with something else.

 Hi,

The Muray web site is no longer available since Briggs bought them on Murray's finance problems!

You may have to wait, till the dust from the changes take place, for parts from them.

I think it will be under a new Murray site or under Briggs!!

                                                                  Fred