Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Richie got me hooked!

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
bbwb


Less is more...more or less

Location: NE Minnesota
Joined: Feb 23, 2004
Points: 115

Richie got me hooked!
Original Message   Feb 20, 2005 8:57 pm
Well, I had the seed planted in my brain by Richie installing an adjustable carburator on his machine....It didn't take too long for it to take root and start me thinking.  I purchased an adjustable carburator on ebay (rebuilt) for $58.  This weekend I installed it and now have it tweeked to run well.  No problem installing it, only had to make some adjustment to the govenor and the high speed limit screw to get the rpm's below 3700.  I had a little problem getting the low speed mixture screw to do anything..  After futzing around I finally got it to do its thing and got it adjusted to perfection.  The tec engine generally does run smoother and appears to have some additional umph.  I got to use it twice today to continue "testing" it. (By the way I now have 11hrs of use since January).  All seems to be well.  Sometimes I get the occasional "pop" or hick-up when idling at full throttle but it does not seem to hinder the abilities of this engine.  All in All I am 95% sure that this was a good move to make.  My EPA carb did not display the problems with surging or power...just made the engine shake like hell!

So far the redesigned chain tensioner is working as it should with no problems...I will keep my fingers crossed

bbwb

Replies: 1 - 10 of 29NextNext page of topicsAllView as Outline
Richie


Bring On The White Stuff

Location: Long Island, New York
Joined: Dec 12, 2003
Points: 562

Re: Richie got me hooked!
Reply #1   Feb 20, 2005 9:15 pm
Hi Robert,

Sounds great.  Did you notice how much easier it was to warm up?  Originally, I had to fuss with the choke more than I felt I should have with the EPA carb.  Good move getting the Sundec, it really takes all the guess work out of it when it comes to fine tuning

Richie
AJace


I have an Ariens 926 Pro because I like Orange



Location: Near Gettysburg
Joined:
Points: 969

Re: Richie got me hooked!
Reply #2   Feb 21, 2005 12:25 am
Now I am wanting one.   But still am unsure if it will void the warranty.  I just don't have the umph to do it.  How much did it cost you guys alltogether?  Maybe the dealer would buy the used one.   

Ariens 926 DLE Professional; Toro S200; Craftsman LT1000, Echo ES-230;

mml4


Snow is good,
Deep snow is better!


Joined: Dec 31, 2003
Points: 544

Re: Richie got me hooked!
Reply #3   Feb 21, 2005 7:18 am
Hi Guys_

AJACE-The part #  for the carb is 632334A. The parts places are going to ask you for the spec # off your engine which then will not cross match.

Use this # off of my pre EPA engine that came stock with the adjustable carb. It is an 8HP L-Head Tecumseh.

HMSK80

Spec #14 5555 OUH

Many of the parts places on the net have the carb. About $70 to $80$.You might want to order repair kit#632347 while you are at it.I like to have the "just in case " rebuild kit cose at hand. Especially for a carb that isn't being used anymore by the manufacturer.

Marc

This message was modified Feb 21, 2005 by mml4


SnapperV210P,Toro22177,TroyBilt42010Snowthrower,Craftsman Shredder,American Turbo Pressure Washer HondaGX200,Stihl011Saw,EchoPas260Trimmer Edger,EchoPB602Blower,EchoHCR150Hedge Clipper
faithfulFrank


He is no fool who gives up what he cannot keep
to gain what he cannot lose....


Location: Batavia, N.Y.
Joined: Jan 20, 2004
Points: 1067

Re: Richie got me hooked!
Reply #4   Feb 21, 2005 8:22 am
Wow, I wish I was that good at this OPE stuff.........I'm proud of myself when I change the oil........

maybe someday I'll get there.

Frank D.

Ariens 1332DLE Pro, Exmark 52" HP ZTR, Gardian Generac generator, Shindiawa T230  Excell/Honda PW, Craftsman rototiller, Favorite IPE- My Mac + Ipod- No Windoze for me!
buttlint


Joined: Oct 14, 2002
Points: 791

Re: Richie got me hooked!
Reply #5   Feb 21, 2005 8:34 am
AJace wrote:
Now I am wanting one.   But still am unsure if it will void the warranty.  I just don't have the umph to do it.  How much did it cost you guys alltogether?  Maybe the dealer would buy the used one.   

Void the warranty???
Ajace...you wanna give the dealer a heart attack or something?
If the mechanic sees a non-compliant carb on a new machine he will more than likely drop his tools and run out of the shop screaming, "I didnt do it...I didnt do it....I swear by all things holy....I didnt do it."
The epa carries on with an old Muslim tradition of "hand removal" if we get caught even standing next too a machine that isnt compliant.
Heck.....I had too bury my "tiny drill set" in a coffee can for fear that the epa might make a spot inspection.
Richie


Bring On The White Stuff

Location: Long Island, New York
Joined: Dec 12, 2003
Points: 562

Re: Richie got me hooked!
Reply #6   Feb 21, 2005 10:03 am

Snowblower worked great with 6" of very heavy snow.  I was actually surprised it had such a good throw distance of at least 25' or more.  My old 5 HP engine would die in these conditions.  Engine RPM held its ground and never fell below 3,360.  Maybe some may feel these gauges are a needless expense, but it sure is nice to see how your machine is performing in varying conditions. 

As for warranty, for once I'll say it, I couldn't care less about it.  All I wanted was a great working and running snowblower that meets my expectations.  The downside was with all the money a good snowblower costs today, I still had to spend another $74.00 to bring the engine up to my standards. The carburetor was an improvement without question.  The only reason I purchased a new carb rather than a used rebuilt one for $55.00 was because the machine is new.  Just wanted to keep the components on an even playing field.   Besides, I think you'll find a good number of people here with new machines will find their warranty may not be in force anymore. 

Marc, thanks again for posting that important SPEC number

Richie
jubol


Location: Dover, De
Joined: Oct 3, 2003
Points: 1558

Re: Richie got me hooked!
Reply #7   Feb 21, 2005 10:42 am
  Hi,

For those interested in changing carbs, go to: http://WWW.greenshoes.com

They have the above  "Carb" for $72.00 with free shipping!

                                                           Fred  

This message was modified Feb 21, 2005 by a moderator


Husqvarna STE927(11.5HP) snowblower,  MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP  Self Prop Lawn Mower,  Weedeater 1500 Blower, Web Gensis  2000 
Richie


Bring On The White Stuff

Location: Long Island, New York
Joined: Dec 12, 2003
Points: 562

Re: Richie got me hooked!
Reply #8   Feb 21, 2005 2:22 pm
jubol wrote:

For those interested in changing carbs, go to: http://WWW.greenshoes.com


Fred,

Nice website link.  I added it to my OPE links for furture reference. 

I was looking at the Kohler engines.  I loved how they give the consumer all the information they require about the product.  Complete engines ratings and specs.  Even an easy to see and understand HP disclaimer.  Then you go to the Tecumseh engine section to look at specs and they list nothing.  I've seen this happen on many other sites.  It has to be that Tecumseh doesn't supply them, no other explaination makes sense for this.  The Kohlers look like great engines.  Great information that can come in handy if repower is needed on a piece of OPE. 

Richie
AJace


I have an Ariens 926 Pro because I like Orange



Location: Near Gettysburg
Joined:
Points: 969

Re: Richie got me hooked!
Reply #9   Feb 21, 2005 3:39 pm
MM14, thanks for that number.  Buttlint scared me with what he said.  I'll didn't really have that umph to do it anyway like I said.  The engine sure does vibrate a bit though when at idle.   I do like Kohler engines but I heard after the have been used a while they seem to have valve/piston problems?  I know that all engines need overhauled, but something seemed to stick out about Kohlers.  I guess it was lack of lube inside.  That hour meter/tachmeter I have is really great. 

Ariens 926 DLE Professional; Toro S200; Craftsman LT1000, Echo ES-230;

Richie


Bring On The White Stuff

Location: Long Island, New York
Joined: Dec 12, 2003
Points: 562

Re: Richie got me hooked!
Reply #10   Feb 21, 2005 4:29 pm
AJace wrote:
That hour meter/tachmeter I have is really great. 



AJ,

Good move on the tach/hour meter   Hey, that photo below your post isn't really you, is it??

Richie
Replies: 1 - 10 of 29NextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42