Cast Iron Cylinder Sleeves Original Message Feb 18, 2005 2:23 pm
What is the purpose of sleeving the bore of a new engine with cast iron? The ohv Snow King Tecumsehs still have the sleeve while according to my dealer the Briggs Snow Intek does not.
I am aware of sleeving being used to keep in service engines that have been bored to the point that the cylinder walls are too thin. Again,why on a new engine?
As Long As There Are Tests, There Will Be Prayer In Public Schools. ;- )
Joined: Sep 16, 2002
Points: 7730
Re: Cast Iron Cylinder Sleeves Reply #26 Feb 20, 2005 9:56 am
Out of all these walk behind lawn mower engines, the only two that have a cast iron bore are the LSQ Quantum I/C and the Intek Pro.
Now, I know I have personally seen some of these engines, that do not have cast iron sleeves in the bore, run 4-8 hours a week 4-5 months a year in high heat and dirty conditions for years and years with proper maintenance. Granted they won't last as long before starting to smoke as the lined engines will, but I see no reason to believe that a snow engine without a liner is a deal breaker for purchasing by any means. Actually, I would make a bet most will be replacing something else on the snowblower before they would need to have the cylinder bored on their snow engine.
Not all lawns are alike, which is why we make a variety of lawn & garden engines to choose from. Let us help you figure out what engine is right for your lawn.
Mid Market Engines of this size are ideal for small to medium sized lawns with obstacles and gentle to a more rugged terrain. Many of these mowers are self-propelled, making mowing less strenuous. Mid Market engines provide:
Premium Consumer Market These top-of-the-line Vanguard engines stand up to daily use by those who professionally care for grassy areas and turf. Premium Market engines provide:
Location: Southern Maine
Joined: Oct 10, 2002
Points: 669
Re: Cast Iron Cylinder Sleeves Reply #28 Feb 20, 2005 12:28 pm
Richie wrote:
Hi Pete,
I do know enough about cast iron cylinder sleeves Vs. aluminum to say that the answer can get complicated or even become a heated argument. Keeping it simple, and using snowblowers as an example, what actually are the benefits of both? When I look at cast iron, it's usually designed for I/C applications. This enables rebuilding where aluminum blocks may not be worth the expense or not recommended.
All things being equal, and an engine is never run low on oil, how many snowblower engines actually wear out and require rebuilding if they are not iron sleeve equipped? As for longevity, is it really worth the expense, if any? If the cast iron sleeve came on a snowblower that had certain features that were very important to me, I wouldn't have a problem getting it, obviosly I wouldn't have a choice anyway. I'm not sure I myself would put that feature as a must have simply as a homeowner.
Also, due to the severe weather conditions a snowblower is used, do these cast iron cylinder sleeves rust at all sitting for most of the year as opposed to aluminum. Is it necessary to fog the cylinder at the end of the season? As for aluminum, it's a porous metal and because of that, it does tarnish therefore it can corrode to some degree too. Aside from simply the rebuild factor, which I believe would rarely be the case for a homeowner, I'm not seeing "must have" benefits getting the iron.
I'd have to say that if either of these type of engines blew after say, 10-12 years, It wouldn't be unreasonable for the homeowner to just say, "well, time for a new blower" Sorry for all the questions.
Richie... What's your point, I said the sleeve is a nice feature, not a deal buster. (for a snowblower)
What you mention about the sleeve rusting in the off season is an intersting question. I suspect that the typical lubricationalong with the chrome content would keep things oK for a spell. Many all iron blocks were built for many years.
As for your last point I feel sorry for the folks who bout a snowblower they are prepared to scrap at the 1 decade mark for the sake of an engine.
Location: Long Island, New York
Joined: Dec 12, 2003
Points: 562
Re: Cast Iron Cylinder Sleeves Reply #29 Feb 20, 2005 1:09 pm
Gilsons wrote: What you mention about the sleeve rusting in the off season is an intersting question.
I know you restore many classic snowblowers. Since you get them, perhaps not running condition, I was curious if you have ever come across corroded or rusted cylinders for either of the type of engines being discussed. My point was more curiosity, whether you could elaborate beyond "not a deal buster." Have you seen cylinders with this type of damage whether I/C or aluminum. Certainly was not trying to get under your skin.
Location: bridgewater nova scotia...aka the swamp
Joined: Jan 3, 2003
Points: 1261
Re: Cast Iron Cylinder Sleeves Reply #30 Feb 21, 2005 5:42 pm
okay so i emailed briggs about this and got the answer...
it is type number sensitive..
12D300 cast iron liner
20D300 cast iron liner
20F400 cast iron liner
20A400 aluminum bore.
i also called technical services while i was on my lunch break,(the stuff i do for my friends).
tech i spoke with said all the intek engines are cast iron liners...i fired him on the spot.
he said only the mowers and tillers had the aluminum bores. still not impressed i advised him to get a bit better information.
he called me back after he called the "factory"and then told me it depends on the type numbers.
i mentioned that it is to hard for a consumer to get this info and that they have to change it in a hurry.
thats all for now.
later chris
craftsman 10/28 snowblower with tracks husky 372xpg chainsaw sachs dolmar bc212 bushsaw mondo trimmer monster tractor with trailer cheep wheelbarro and couple shovels and a partridge in a pear tree
Location: bridgewater nova scotia...aka the swamp
Joined: Jan 3, 2003
Points: 1261
Re: Cast Iron Cylinder Sleeves Reply #33 Feb 21, 2005 6:05 pm
got ya...
snowshoveler ...thats me and my name is also chris ...not chris s thats another guy here .
he is much taller than me so you wont have any problem telling us apart.
later chris
craftsman 10/28 snowblower with tracks husky 372xpg chainsaw sachs dolmar bc212 bushsaw mondo trimmer monster tractor with trailer cheep wheelbarro and couple shovels and a partridge in a pear tree
Location: Long Island, New York
Joined: Dec 12, 2003
Points: 562
Re: Cast Iron Cylinder Sleeves Reply #34 Feb 21, 2005 6:13 pm
I think I'm going to have to step over to Marshall's side of the street. Maybe it really will be the year 2020 before we can actually get the correct information from the manufacturers.
I think I'm going to start a new thread soon. I want it to be called, "If you had to design a new OPE engine, what features should ithave?" I don't think that'll fit on a title.
