Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Now that I see the parts drawing wondering if you wrap the vertical rod that goes up to the control handle (#16) with a short flat rubber bungee cord to the left handle bar.  Maybe down near the "u-joint" ?  (just above #33) Might give you enough friction to stop it from wandering around on it's own.  Down and dirty quick fix might be to bend the tab at the bottom of the handlebar near the U-joint gear to impart some friction.  Or get an eyebolt with appropriate size grommet, couple washers and nylok nuts and drill a mounting hole through the handlebar. Depending on condition,  looks like you'd need to knock out the roll pin to get the vertical rod out which may be too much for an old fitting to endure.

I just have 2 tabs open, here and where ever I can find the pics on the net.  I used to use photobucket until they tried to steal everyones pics and charge you (after they deleted all your internet pics previously posted).  Some sites you can attach your own pictures from your computers picture files. 

Usually you can find schematics or "here's what I'm talking about" type pics on a search.  Right click on the pic you want and select "copy image location"  the mouse keeps it in itself.  Go back to your text area of your post and left click the 3rd icon from the right (it's supposed to be a landscape scene of a mountain, but it looks like the back of an envelope to me).  That will have a pop up url box, right click inside the blank and select "paste", it enters the posting the area.  Those old Toro's are very over engineered heavy weight workhorses for sure.