Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > MTD Yard Machine 5.5 hp
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
NickM
Joined: Mar 1, 2005
Points: 21
![]()
|
 |
MTD Yard Machine 5.5 hp
Original Message Sep 24, 2018 11:11 pm |
|
I picked up a MTD 31A-3CAD762 two stage blower about a year ago. I had it as a 2nd machine that I left by my in-law's house. It started and ran without issue. When I tried it last year after a wet snowfall about 6-8 inches it stalled out when I hit the snow. A family member was supposed to take it and service it but it never got done. I decided to take it back today and looked at the belts and the auger belt looks worn. I have both belts coming in a few days and will change them out promptly. My issue is evaluating the machine without putting it under a load condition. It will run fine, move forward, and turn the auger. Any way to predict how it will work without actually waiting for a snowfall. It runs smoothly but I am willing to change out the carb if needed.
|
jtclays
Joined: Aug 7, 2011
Points: 16
![]()
|
 |
Re: MTD Yard Machine 5.5 hp
Reply #4 Nov 11, 2018 12:06 pm |
|
Agree with niper99 on both his posts. Especially considering you noted a loose auger belt. If the belt was the problem the blower would stop intermittently throwing snow when over loaded, not stall engine. Those Tecumseh 5-5.5hp flatheads will eventually need valve stems ground to give clearance, especially exhaust side.
|
NickM
Joined: Mar 1, 2005
Points: 21
![]()
|
|
|
Re: MTD Yard Machine 5.5 hp
Reply #5 Jan 28, 2019 9:55 pm |
|
Easy winter here in NJ so far. I have not run the unit in snow yet since replacing parts. Valve clearance check may happen in the off season.
|
|
|
