Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
Ben07
The more you know about something, the more you find there is to know.
Location: Pittsburgh, PA
Joined: Feb 26, 2004
Points: 178
|
|
Re: Gas Cans
Reply #22 Feb 14, 2005 1:25 am |
|
I had a camping bottle like Ben07 had mentioned. I looked at it a while back and saw that it needed to thrown away. Too much rust.
HiAJace. Those camping bottles as far as I have ever seen are made of aluminum. Not saying they never made some out of steel which can rust, I just never seen one, Mine are 10 year old vintage, Have looked at what is out there today, like at Dicks sporting goods, they are aluminum also. And keep in mind they are only good for small stuff, small tanks and top offs, Usually the situations where I can spill most times Ben07
This message was modified Feb 14, 2005 by Ben07
Ariens 8524LE, Toro CCR2000, Jacobsen S-B S-blowers, Generac 10hp Gen-convt. to N.G., 5 L-boys(D's F's &Dura( 74,77,80,88,00), Antiq. 1960 AYP 20 in. mag w 3.5 Tech mower. Ryan/Ryobi gas Trim. AYP 205 gas blwr. Mac c-saw,Toro E-blwr, 2 Weed-E e. stg. trims. outboards, boats, util trail, 2 Jeeps
|
Ben07
The more you know about something, the more you find there is to know.
Location: Pittsburgh, PA
Joined: Feb 26, 2004
Points: 178
|
|
Re: Gas Cans
Reply #24 Feb 14, 2005 1:42 am |
|
I understand completely While your here who is that runnin the snowblower up to their hips in snow, on the pic in your posts, One of your pic's or just a borrowed pic. Great picture whoever's it is, The photographer must have been wearing snow shoes to get all the way out there for the shot. Ben07
This message was modified Feb 14, 2005 by Ben07
Ariens 8524LE, Toro CCR2000, Jacobsen S-B S-blowers, Generac 10hp Gen-convt. to N.G., 5 L-boys(D's F's &Dura( 74,77,80,88,00), Antiq. 1960 AYP 20 in. mag w 3.5 Tech mower. Ryan/Ryobi gas Trim. AYP 205 gas blwr. Mac c-saw,Toro E-blwr, 2 Weed-E e. stg. trims. outboards, boats, util trail, 2 Jeeps
|
Ben07
The more you know about something, the more you find there is to know.
Location: Pittsburgh, PA
Joined: Feb 26, 2004
Points: 178
|
|
Re: Gas Cans
Reply #27 Feb 14, 2005 1:54 am |
|
I guess he just startedb into a drift or something cause don see any trail behind him, unless he slept there Just kidding of course Ben07
Ariens 8524LE, Toro CCR2000, Jacobsen S-B S-blowers, Generac 10hp Gen-convt. to N.G., 5 L-boys(D's F's &Dura( 74,77,80,88,00), Antiq. 1960 AYP 20 in. mag w 3.5 Tech mower. Ryan/Ryobi gas Trim. AYP 205 gas blwr. Mac c-saw,Toro E-blwr, 2 Weed-E e. stg. trims. outboards, boats, util trail, 2 Jeeps
|
Ben07
The more you know about something, the more you find there is to know.
Location: Pittsburgh, PA
Joined: Feb 26, 2004
Points: 178
|
|
Re: Gas Cans
Reply #28 Feb 14, 2005 1:57 am |
|
Thanks for the blow-up looks like there may be a trail, just that he may have came into the pic on a hard left hand turn, looks like a trail on the right That will teach me not to be a doubting thomas Ben07
This message was modified Feb 14, 2005 by Ben07
Ariens 8524LE, Toro CCR2000, Jacobsen S-B S-blowers, Generac 10hp Gen-convt. to N.G., 5 L-boys(D's F's &Dura( 74,77,80,88,00), Antiq. 1960 AYP 20 in. mag w 3.5 Tech mower. Ryan/Ryobi gas Trim. AYP 205 gas blwr. Mac c-saw,Toro E-blwr, 2 Weed-E e. stg. trims. outboards, boats, util trail, 2 Jeeps
|
Richie
Bring On The White Stuff
Location: Long Island, New York
Joined: Dec 12, 2003
Points: 562
|
|
Re: Gas Cans
Reply #31 Feb 18, 2005 5:14 pm |
|
Received the Han-D-Pump today. It fit right onto my 6 gallon plastic fuel container. None of the extra pump adapters were needed. I only had a little fuel left, but I was able to test it, worked great Nice to be able to leave the container on the floor for a change Good flow rate too.
Richie
|
|
|