Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Any one know of a good way to modify one of these spill proof gas cans to not spill so much gas.

You almost always need to hold the spring loaded nozzle open while you are trying to fill a tank or pour into a funnel. All the while, the you are trying to watch the gas go in the tank at a terribly slow rate. Instead you are knocking over the funnel or pouring the gas down the side of the tank.

I feel like most of the time I am a pretty reasonable, forgiving sort. But I think I would like to see the person that came up with these things tarred and feathered.

What could possibly be the matter with a regular gas can? I can't get mail order, went to PA and Delaware. Forgot to look when I was in NY. Tried to buy a regular spout, doesn't fit the can.

Help.

 This thread got me to wondering,and I did some searching.  Has anyone ever tried this funnel ? Seems like it might be the answer. ( Of course, I'm an optimist  )

http://www.smallenginebusiness.com/mowerzone/prods/7-05903.html

I hate those new gas can's....   Different thread size so can't use old spouts.  Found that the blue cans for kero  don't have the safety spout and they are the same thread size,  If you wanna mix and match before check out(not actually suggesting that),   or buy two and throw blue one away.  Could buy the blue one and paint it red.   

What I use for my small stuff like string trimmer etc is  one of those aluminum fuel camping bottles. (looks like a thermos bottle cept narrow spout like a pop bottle,  no funnel usually needed) They are made for fuel/gasoline etc.   they vent before opening it,  they come in various sizes up to a quart.  Sure you gotta fill them, but they are easier to fill and you fill it once and you get four fills on the small stuff,  and real quick to top off when you only want a few ounces like when you start out.

Get a couple, oil/mix in one plain in other.  You will be able to pour as fast as the local bartender.  Easy/small enough to use with no funnel.

I have one of those old time safety 5 gal gas cans.  Looks like an old fashioned  milk can from a dairy farm.  They were bout 60/ 70 bucks.  Found it at on old auto parts.  It was on there floor for years , inch of dust.  asked about it, guy said He will give it to me for 12 bucks as it  was his last one and he was tired of lookin at it.  I waxed that baby, (colonite insulator wax) the spout opening is big enough to clean the inside with like a stick  an a rag. (actually big enough to get a good size arm in there, Do not try this at home folks!!) just don't do that. however if you even find an old rusty  one, you could get in there enough to sandblast and coat, (like a por 15 or something. ) (did a couple junky old motor cycle tanks for ones I keep At hunting camp,with that stuff, didn't work too bad)  (haven't clogged the carb yet, 2 years)

Ben07

I had a camping bottle like Ben07 had mentioned.  I looked at it a while back and saw that it needed to thrown away.  Too much rust.  I wonder if gas stations will turn on the pump if you try to fill a blue can with gas.  I don't like metal cans as they rust.  I like plastic, but don't like the style that store away in the can.  Too much dirt can get in there over time.  I like the style that has the spout on the top with a sealed cap on the end.  I only have 1 gallon can like that, and it has a 2 cycle mix in it.  The best alternative to all of this is probably to have a setup like me and Richie do. 

AJace wrote:

HiAJace.  Those camping bottles as far as I have ever seen are made of aluminum.  Not saying they never made some out of steel which can rust, I just never seen one, Mine are 10 year old vintage,  Have looked at what is out there today, like at Dicks sporting goods, they are aluminum also.  And keep in mind they are only good for small stuff, small tanks and top offs,  Usually the situations where I can spill most times

Ben07

Well, I meant alimum cans.  I also used it for 2 cycle mix.  It had sat dry for several years until I finally decided to throw it away.  Maybe the oil helps it from rusting.  All I know is that it didn't look good inside.

I understand completely

While your here who is that runnin the snowblower up to their hips in snow, on the pic in your posts,  One of your pic's  or just a borrowed pic.  Great picture whoever's it is,  The photographer must have been wearing snow shoes to get all the way out there for the shot.

Ben07

It is someone testing the Ariens blowers as hard as they can.  I understand that Ariens does this regularly, to make sure that their machine are up to par. 

Here is larger one

I guess he just startedb into a drift or something cause don see any trail behind him,  unless he slept there

Just kidding of course

Ben07

Thanks for the blow-up looks like there may be a trail,  just that he may have came into the pic on a hard left hand turn,  looks like a trail on the right

That will teach me not to be a doubting thomas

Ben07