RedOctobyr
Location: Lowell area, MA
Joined: Nov 5, 2011
Points: 282
|
|
Re: ariens st824 speed selector
Reply #6 Feb 8, 2015 1:35 pm |
|
I no longer have my ST824 (mine had the 6-forward, 2-reverse setup). But on my current Ariens, I believe that spring pulls the shift-lever to the left, to hold it into the cutouts for the different speeds. I move the lever to the right to get it out of the cutouts, then move the lever forward/back to change speeds.
If yours works similarly (notches to the left-hand side, going down the gear-selector channel in the control panel), I'd look for something underneath the panel, to the left of the shift lever, that the spring could hook onto.
If yours works differently, then disregard this.
|