Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Got an old SB tire that leaks slowly at the rim.    I really don't want to go through the work of replacing the tire and have no assurance a new one will bond any better to the old rim.

Is there a good goop to help seal it? 

i agree with the others, tubes are probably the most reliable way to go... I tube all flats or slow leaks unless customer does not want a tube!!!

Just add a tube. I had a leaker that looked good from the outside, as soon I broke the bead, I saw crusty rust in the sealing area. The tube is the best option. My tube was less expensive than a can fix your flat. I have a small set of smooth tire spoons for mounting and demounting lawn and garden tires, so I don't poke a hole in the tube. Mark

Challenge not to damage the tube assembling it, but it works!

What should the pressure be with a tube, same as without?

Thx.

Yes, pressure should be the same. Though, with a tube you can run a little less pressure and not have to worry about the bead seal popping off when you turn. That might give you better traction. Just be sure to keep the pressure in both tires even so the machine will go straight.

Success, holding air.  Thanks