Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Carb on Honda Clone leaking gas -- will cleaning carb solve this issue or do I need parts for the clone

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Underdog


Joined: Oct 18, 2008
Points: 332

Carb on Honda Clone leaking gas -- will cleaning carb solve this issue or do I need parts for the clone
Original Message   Dec 19, 2013 9:57 pm
The bowl on this 6.5 hp Honda clone is leaking gas. This is one of the blue $90 Harbor Freight 6.5 OHV engines. It has never given me any trouble as a transplant on this HS-520 snowblower. Last spring I drained the bowl at the end of the season. I was surprised when I filled the tank with gas today and found it dripping out (pretty fast) around the bowl o-ring gasket/seal. At first I thought I might need a new o-ring, but shouldn't the float and needle be shutting of the flow of gas the bowl before it starts pouring out? Do these clones take normal honda carb parts? Any suggestions on where I should start? The engine still starts up and runs perfectly, it just leaks gas bad. I cannot find a part number for a replaceable seat. [img]http://i264.photobucket.com/albums/ii171/jmccollough/056-1.jpg[/img]
This message was modified Dec 20, 2013 by Underdog


Replies: 1 - 12 of 12View as Thread
Replies: 1 - 12 of 12View as Thread
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42