Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > SIMPLICITY SS 20'' (5-51M, 5/51, 551M )

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:

hirschallan

If it aint broke don't fix it !!

Location: Northern Hills of NY
Joined: Aug 25, 2005
Points: 327

SIMPLICITY SS 20'' (5-51M, 5/51, 551M )
Original Message Feb 28, 2013 5:44 pm

simplicity model: 5-51M, mfg no.1692320, serial no, 376 ON, ref no.603243

I am currently working on the simplicity ss and the auger is bent. Using it like this isn't an option. It has the HSK850 in it and runs very well. I'm looking for the auger for this and the only place that has real part numbers is Small Engine Parts Warehouse. Their part # is 1686697SM which includes other stuff but none of which is available. I am pretty sure simplicity wasn't the only one which used that auger. How can I find out which other mfg used the same part number so I can broaden my search.

This message was modified Feb 28, 2013 by hirschallan

Replies: 8 - 9 of 9

All

View as Outline

hirschallan

If it aint broke don't fix it !!

Location: Northern Hills of NY
Joined: Aug 25, 2005
Points: 327

Re: SIMPLICITY SS 20'' (5-51M, 5/51, 551M )
Reply #8 Mar 3, 2013 4:41 pm

borat wrote:

Use an impact driver to loosen the nut.

As I said the threaded portion is molded into the center of the auger pulley so impact driver option here.Nothing to grab onto.

hirschallan

If it aint broke don't fix it !!

Location: Northern Hills of NY
Joined: Aug 25, 2005
Points: 327

Re: SIMPLICITY SS 20'' (5-51M, 5/51, 551M )
Reply #9 Mar 3, 2013 4:44 pm

hirschallan wrote:

As I said the threaded portion is molded into the center of the auger pulley so impact driver option here.Nothing to grab onto.

I will first get this one loose and measure tip to tip. Only then will I know for sure its actual dimensions.

Replies: 8 - 9 of 9

All

View as Outline