Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I have a 9hp Ariens snow blower that luckily made it through the bulk of the blizzard before stalling out. It was difficult to re-start and the only way i could do it was to re-prime the machine. It was running rough all day and the gas is new. It kept sounding like is was needing fuel. Normally I just give it one pull during a storm to re-start. Never any re-priming needed. I'm thinking it could be a possible frozen fuel line, but I really have no idea. The machine is about 7 years old. Anyone have any thoughts on what this could be?

I forgot to mention that and the end of the year I shut down the fuel line and run it dry before storing in the spring.

you say it has new fuel in it. had you drained the old fuel out of it when you stored it last year?   you could have water condenced in the fuel tank.   If you did not drain you fuel tank I would try that first and then refill with fresh gas.   If that doesn't work then you may have dirt in the jet/emulsion tube of the carb and that would require either removing the bowl and unscrewing the jet and pulling the emmulision tube from the bottom or taking the carb off and doing it that way.

Carl

On the fuel portion, i stored it with sta-bil. Doesn't sound like it was enough. I may have to try your other suggestions. going to be a long day.

thank you

Try it with the gas cap a tad loose, could be clogged/blocked vent.