Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Hey, I have had my 826oxe for almost three years and for the first time the two shear pins that bolt the impeller onto the shaft that leads into the auger gearcase broke. I never had any on hand because I was told/it is advertised there is no need for shear pins in these machines. And I couldn't get new ones when this happened because everything was shut down due to the storm. So I had to shovel! When the shop did open the next day they said it was common for this to happen, especially due to the high stress on the machine because the type of snow it was clearing(wet/heavy/hard packed and about 3 feet high). The guy said also that the shear pins in the auger do break on occasion. So I picked up a bunch of extra shear pins for the impeller and auger. I wish they had told me this when I bought the machine so I would have had them on hand for when they were eventually needed. Any other toro owners have this happen? If you haven't, and you don't have any extras in your toolbox I advise you to go buy some!