Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Everyone has different needs.
In a ideal world, I would love to get a super beasty 24" Wide Bucket 2 stager

Yes.  It's not technically another stage, but a smaller auger above the main auger to break up taller drifts.

I did something similar to hcbph1, I bought a mid 80"s Cub Cadet (when they were still owned by international harvester) 26" 8hp two stage without a motor for 40.00 dollars, other than the faded paint it was in excellent shape.   It had been in storage for many years as the original owner blew up the engine when it was only a few years old, removed the engine and never finished the job.


I put an 11hp Honda clone with electric start and made a clearance kit for it.   This machine is an absolute monster weighing in at over 340lbs but, with a true differential and roller skids  it is very easy to turn and handle.  With the clearance kit it will pump wet slush like a fire hose and not even bog down the engine.  

borat wrote:

Here's what that one looked like when I got it

http://i162.photobucket.com/albums/t248/hcbph/Snowblower/th_IM001170.jpg

Here's what it looked like after some rebuilding and swapping out the auger

http://i162.photobucket.com/albums/t248/hcbph/Snowblower/th_536_918900_Modified.jpg

Here's a better shot of what typically is called a 3d stage

http://i162.photobucket.com/albums/t248/hcbph/Snowblower/536_882700%2010%20HP%203%20stage/Auger_Reassembled.jpg

The upper beaters acts like a beater bar, breaking up tall drifts and knocking it down for the augers to pick up