Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Toro Single Stage 621 or 221
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
borat
Joined: Nov 10, 2007
Points: 2692
|
|
Re: Toro Single Stage 621 or 221
Reply #5 Sep 17, 2012 8:45 pm |
|
I have the 221QE two cycle and am thoroughly impressed with all aspects of it. Light, powerful, effective and I got a brand new one comparatively cheap. However, as much as I like it, I have several older 139cc Tecumseh two cycle powered single stage machines that I use more than the Toro. I have made a simple modification to them to over-ride the governors to make much more power than the stock 5 h.p. claimed for the engines. The last machine I bought a few months ago is a Murray in near mint conditon. I got it for $30.00. When modified, these Tecumseh powered machines will easily outperform the 221Q. That's entirely from almost doubling the power output because the rest of the machine isn't nearly as well designed as the Toro. I've been flogging a 1997 Craftsman machine for two hard winters now and it's holding up nicely despite being revved 3000 rpm past it's recommended 3500 rpm.
Personally, I'd buy a used Tecumseh 2 cycle machine cheap and hop it up. However, if I were buying new, I'd go with a two cycle simply due to personal preference and the previously mentioned advice that they will soon be very scarce whereas four cyle machines will not.
|
borat
Joined: Nov 10, 2007
Points: 2692
|
|
Re: Toro Single Stage 621 or 221
Reply #8 Sep 20, 2012 9:20 am |
|
If the proper starting procedure is used, my 221 will start first pull every time. Actually, all of my snow clearing equipment usually fire up with the first pull regardless of temperature. I would suspect that the reason for your parents complaining about starting the leaf blower is likely from numerous pulls on the starter cord to get it to fire. However, if the folks are physically limited, electric start will be a convenient feature. If you can get the 221QE for $600.00 or less, that will be a good price.
By the way, regardless of what you buy, ensure you know what the correct operating rpms are and have the engine speed measured to ensure it's correct. My machine's governor was set at 3700 rpm. It's stock upper rpm range is 4100 which, when adjusted to that speed made a substantial difference in power output. However, due to the slope of my driveway, I actually had to cut the rpms back to around 4000 to keep the machine from pulling so hard going down hill. The Toro paddles really bite and pull compared to the other SS machines I have.
|
|
|