Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Hello All, I have an older ('94) White 314-646F190 snow blower which is powered by a Tecumseh 8hp HKSM 80 engine. While tipping the entire unit on its side to clean it, I noticed that oil was draining out through a black hose which is attached to the Tecumseh engine (carb. side). The hose comes off the engine straight out from the side and then is angled 90 degrees down. My 1st thought is that theres no way they would construct an engine like this in such a way that an open tube runs from the crank case of any engine, for whatever reason - makes no sense to me but hey, I'm no expert. So, I'm figuring I have a real problem on my hands (?). The motor hasn't been run now in several years as at the start of the winter season several years ago, the engine (electric start) turned over but would not fire up. I assumed, after replacing the plug and still having no luck, I had a fuel line/carb problem. Now I'm wondering if I haven't some how ruined the engine. Can anyone tell me what this black hose is for and, if its allowing oil to pour out of the engine, is this the major problem it appears to be to this newb ? Thank you so much for any help offered !!

Thank you once again. Yes, the PVC valve - this is why I was confused. 'Vented' but sealed. I will let ya know how it all shakes out. Best laid plans of mice and men - my son shows up yesterday with an expired inspection and throwing a code for O2 sensor. It sounds like a cracked exhaust manifold to me so maybe causing the code. Before he racks up a bunch of tickets, I'm gonna have to get on this project 1st now. Never ending :-)

I've always heard "if it has fluid in it, it has to breath".  I need to get around to extending the breather hoses up on my jeep for the axles and transmission before the great floods come at the end of the world in December :)

-Dan

"..the great floods.." Waddya got planned if its 'fire' ?? :-)