Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Do you buy snowblowers early in the season in preparation for a big snowy winter?  If you are, you're a planner.

Do you hold off buying snowblowers until after a big snowstorm to make your purchase?  If you are, you're a procastinator.

Can I get back to you on this???

This may be a biased/leading question When do you buy your blowers. Do you buy them early/late in that season? I'll bet some of the crazy folks out there bought one, and actually just left it at that

Personally, ~11 years ago, I bought an old (60's-70's), cheap, non-running Simplicity in the fall, after we got slammed the first winter renting that place. Of course, the next winter, when I had it, we didn't get much. Kept that machine maybe 2 seasons until trying to keep it running just didn't make sense (too many worn out items), bought a '93 MTD to replace it (non-working, during the season). And kept that for about 8 years.

Now, I still haven't sold the MTD (no snow to spark interest), I've added an ST824 (bought before the season, to answer the question), then an SS322 (free), then a 5hp Yardman (inexpensive). Now I'm "all dressed up with nowhere to go". I could have really used the ST824 last season. Instead, I've gotten to try it once, when I piled up some snow using the SS, and tried blowing it, just to make sure it actually worked.

I tend to be a planner for this stuff. Better deals before the snow comes, plus you can actually find something to buy (as opposed to going to Home Depot when even all the shovels are sold out).

I enjoy buying old iron and bringing it back to life.  I always have at least one big two stage machine ready to go and sometimes have a few extra ones laying around.  I sold 5 machines that I bought last year and re-built early this fall to people who wanted to be prepared for the storms that never came this year in the Northeast.  I suspect I will be able to buy a few this spring really cheap and fix them up for next year, but, i suspect the demand next winter wont be a good since we had no snow so far this year.

FrankMA wrote:
Sure, no hurry, I know you're busy working on that CCR3000, and that stack of firewood out in the backyard. 

RedOctobyr wrote:
I'm not saying that skepticism and suspicion are involved, but it's possible.  I have no intention of identifying lawyers and politicians, that's not really the scope of this survey. 

I buy ahead if shopping for serious use applications.  I recall buying a new 10/29 Craftsman in the fall of 1995.  Good thing too.  The winter of '95 to '96 was a 100 year season.  Highest snowfall in one season that I've ever seen.  It was so bad, that our street was out of commission for close to a week.  I had to walk approx. 1/3rd of a mile to a secondary highway to be picked up by someone from work who wasn't keen on working around the clock.  Our office used a number of 4x4 vehicles (of which I was assigned one) and pressed them into service picking up and dropping off people who lived in semi-rural areas that didn't get immediate snow clearing.  Due to my street being snowed under by about two feet of snow in one shift, I just turned around and brought the vehicle back to the office to have another guy drop me off as close as possible to home.  Fortunately, the local boys were out on their snowmobiles making paths for residents to walk on.  Did that for at least a week. 

That year the Craftsman probably saw 80% of it's life used up.  It was flogged pretty much every second day moving huge amounts of snow.  Due to the snowfall and drifting caused by high winds that machine was invaluable.  It never let me down. 

Oh, and by the way, if it wasn't snowing, it was very cold and the freaking wind was relentless.  It was a tough season to say the least.

So, for serious snow removal, I buy ahead.  For fun equipment, I just buy is as it becomes available.  Particularly if a good deal comes up on something used.

 

I bought my first new snowblower before  the first snow of December 1998     I guess this would make me a planner.  It was a Craftsman 33 inch with a Tecumseh 13.5 engine.  

I always maintained it well with yearly oil changes etc.  and  used it until February 4th  2011, (through hard winters like the 95-96  one)  when the rod went through the block under the starter.

The next day I purchased  the   Husqvarna  27 inch , hydro, 14.5 Briggs So I guess this time ,it was a necessity and   I was a procrastinator.

aa335 wrote:

OUCH!!!

Seriously, though.. I'm a planner. I always try to have all my snow clearing OPE in good working order before the $h!t hits the fan. The last 2 years or so I became enamored with SS machines and have bought several that were either in great shape or needed some serious TLC. I kind of live by the boy scout creed "Be Prepared"!

When it comes to snowblowing equipment.  I'd have to say I'm a planner.  Usually start projects around the end of August first of September.  But I've been thinking about them off and on all summer.

Then once I get started some of them take on lives of their own.  And one thing leads to another.  Of course I can't leave anything the way it is.  Something has to be changed, updated, modified.

Every things a mouse trap to me.  Gotta try and build a better one. 

Normally here in West central Michigan you'd better be ready by the second week in Nov. just in case.
This year I'm thinking about putting Sta-Bil in my tanks.  Very disappointing.