Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

RedOctobyr wrote:
That's the same engine on a 16"  Toro Powerlite.  Underpowered when used on a 22" wide snowblower.  Not sure why such a small engine was used on that Ariens, seems to perform more like a snow broom than a snowblower.

There was also a SS522, with a 5hp Tecumseh, mounted in the same machine. Alas, this has the smaller engine. But for free, it's 3hp more than a shovel It will still have more power than the electric I was using for the deck (Toro Powercurve 1800, 18", which did surprisingly well in the big storms last winter). And if I need more oomph out of it, I can try revving it higher.

Edit- That said, it is admittedly kind of funny that my 8 hp 24" 2-stage has 4 hp/ft, while the little SS only has 1.6 hp/ft. Only 40% of the power of the 2-stage, but 90% of the clearing width. Something tells me it will bog down a little more easily. That's OK, bigger storms will get the bigger machine.

I should be jealous about snow but it is nice not having to blow the snow.  No major snow for another few weeks and we got lucky this week.

We got maybe 1-2" of light fluffy stuff overnight. Gave me an excuse to try the little SS again. Granted, this storm played right to its strong suit (a mild storm, with very lightweight snow). But it was really nice. It was quicker than using the 2-stage (or a pusher shovel), not to mention easier. It was blowing as quickly as I wanted to walk with it, so it was actually really fast (my legs have a faster forward speed than my 2-stage does). This was the kind of storm where a 6hp, 30" machine would do great. You didn't need much power, just speed. So it was perfect. I can see why people like having 1 of each, if it's practical.

I'm in Chicago suburbs.  Snow is coming down steadily, expecting 5-8" inches total by midnight.  It's the heavy, easy to pack type of snow.  Good thing it's snowing like this on Friday.  No rush to snowblow and the kids can play outside tomorrow. 

Now the big question is which snowblower to use tomorrow.  :)  I also have a 30" wide poly show pusher bought last winter that hasn't seen much action.

aa335 wrote:
Given the topics of this forum, if you decide to use the pusher instead of one of the snowblowers, you may want to keep it to yourself. OPE is Outdoor Power Equipment, not Outdated Push Exercise

I didn't say I was going to use just the snow pusher.  Snow is golden at this time of the year, especially since we haven't seen much of it this winter.  I'm sure to get my OPE fix, even if I have to snowblow the neighbor's sidewalks.  :)  There's about 250 feet of it and those teenage boys aren't doing it by themselves.

I have 3 snowblowers but I still enjoy the exercise of shoveling by hand.  :)  Nothing to be ashamed of that. 

Finally got some snow like RedOctobyr was saying, about 3" total. Finally got a chance to use the venerable Honda HS621 Single Stage and was not very impressed to be honest. I think I'll have to take a look at tightening the tension on the belt or getting a new belt altogether. It threw the snow but not as robust as I would have expected and got clogged at the base of the chute several times. The snow was very light and fluffy so I did not expect the issues I encountered. It has to be a stretched belt that warrants an adjustment or replacement. Any other thoughts or suggestions???

I think you're on the right track, it's either belt slip or low belt tension when bail is engaged that would cause clogging.  Check to make sure that the pulleys or belt are not coated with some kind of lubricant.  I've pushed my HS621 full bucket height into heavy snow and concrete mix at the EOD and never had clogging issues.  The engine will likely stall out under heavy load before clogging.  3" is light fluffy snow should not cause any clogging, in any machine.

When it would clog, could you tell if the paddles were still spinning? Was anything coming out at all, or still getting flung around up front? If the belt was slipping that badly, I'd expect that the paddles might have stalled out entirely, and maybe you'd be able to see some evidence of that? If they had definitely stopped, then you're definitely chasing a belt issue, and you can narrow down the possible clogging causes.

With the fluffy snow, there wouldn't have been much resistance against them. Could you try pulling the plug wire (or killing ignition, etc), hold the bail down with something, and try rotating the paddles by hand? Can you tell if they can turn without the engine turning over with them? I replaced the belt in my Ariens while getting it ready for action. It did have a belt tension adjustment using the idler pulley, which I had to shift quite a bit to snug it up to the spec in the manual. Just trying to think of ways you can check the belt without opening the machine, as removing the cover on mine was a bit of a pain. Don't know if the Hondas are the same way.

Edit- Another option for checking the belt- With the engine off, hold the bail down with something to engage the paddles (I like zip ties). Stick something (a piece of wood, whatever) into the paddles to jam them up so they can't turn. Now pull the cord, and see if the engine can turn with the paddles stuck. That would let you put more torque on the belt than you could by simply fighting the engine's compression as you turn the paddles by hand. Plus you can't somehow lose a finger