Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Does anyone know of any new snowblowers out for 2012? Looking to trade in my Toro 826OXE for something with a larger motor. I am leaning toward a larger Toro but  I am open. Any suggestions?

The box being wet would not bother me as much as being ripped open. They may have speared it with a forklift. The fact that the driver would not wait for you to open & inspect for damage should also be reported.

                                    Happy New Year to All:

I made the decision to cancel my Toro 926 OXE as home depot sent e-mail about a 7 day delay and so again I see the Winter for NY as over and will wait till next season.

I would like feedback as to the whole Briggs&Stratton issue of supplying snow blower engines to manufacturers but also being in the snow blower manufacturing business with their own brand Simplicity and owning Snapper. Toro may have made the made the right decision in leaving B&S. The web has stories of B&S engines which need warranty work but getting delays while B&S tend to their brands first.

I want to get an Ariens next season but feel as though they are in a no win situation, if Ariens switches engine manufacturer they risk losing business as I am sure Toro is. If Ariens does not then they are dealing with a manufacturer that may be giving preferential treatment in engine build quailty to thir units first as well as better overall warranty service.

I tried to write a review on the Toro 926 OXE mentioning some of these issues on HD website but was rejected either because I never took possession of the unit or  because I mentioned the riff between B&S and its engine clients. I feel sorry for American manufacturing with the unrelenting pressure to be competitive with Chinese made products. It seems Toro, Ariens and others have little to no choice but to either stay with B&S or seek another engine manufacturer which means Chinese.

I feel B&S is in the best position to reap from this arrangement as they still have that name recognition even if their engines too are made in China. I also can not fault B&S as they are just trying to survive as some of their clients turn from them to less expensive Chinese made engines. B&S has no choice but to make up that lost client income by taking on manufacturing their own units.

Any thoughts on what brand snow blower to consider given these issues and your thoughts on it as well.

Shop around for a used Ariens, Toro, Simplcity/Snapper that's around ten years old and in good condition.  Your worries will be over.  With the money you save, you can always re-power with a top notch Honda, Robin, Kohler or Kawasaki engine from an outfit like Small Engine Warehouse.   Those older machines were very well built and if you can find one that's been lightly used, it will last you a lifetime with proper maintenance.

The only other option I can think of is Honda or Yamaha snow throwers.  No concerns there about cheap components.  However, it will cost you your first born......

I have to agree with Borat, if you can get a lightly used or well taken care of quality machine that is 15 years old or older that might be your best bet.

I had a 26 year old 24" Snapper that I used last year that I re-powered with a harbor freight 6.5hp OHV engine and it went through 18+" of snow like grass through a goose.

This year i will be using a 1983 26" Cub Cadet that I re-powered with an 11hp Honda Clone. I suspect that this Cub will out live me.

You really can't beat the old American Made snow blowers.  My Cub has a true differential and even though it weighs 328lbs turns easily

I am on CL everyday and yes there are a ton of blowers currently for sale! Don't be focused on your exact location, spread out 50-75 miles and you will be shocked the deals that can be had but be ready to move fast good deals dont last long! Good Luck!

stresst wrote:
Got to have CA$H in hand and be ready to go at a moments notice to score the really good deals (for the most part). CL is jammed with snowblowers these days that keep rotating around week after week because of the lack of snow - good time to haggle and score a deal. Everything will change just before or after the first big predicted or actual snowstorm...