Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I'm looking to add a single stage snowblower.  I currently have a toro 826 OXE two stage.  I didn't want to spend too much so my budget is about $500 or so.  Anyhow, I can get the toro 418 for $449 Canadian (electric start) or Sears Canada is having a sale on their Craftsman single stage 205 cc Briggs built single stage.  It's the same one that Briggs offers under different brands including simplicity.  This one is a display model and it comes with the remote chute control too.   I like the toro but I'm not sure if the small 87 cc engine and narrow 18" width would be of any use.  The Craftsman comes with a 22" width.

The problem with small amounts of snow is the gathering part of the process. A Clarence kit will not address that.   If it's really light, fluffy stuff, a close clearance impeller might work like a bit of a vacuum cleaner but with snow that light, a leaf blower would probably be better.    

I've got a fairly big driveway (110' x 18' with a 35' x 35' turnaround at the top).  If the snow isn't sufficient enough to use a machine, I find a rink type shovel ideal to push the snow to the sided then blow the piles onto the lawn.   I'm not particularly young but picking up a shovel every so often isn't that big of a deal.  Most of the snow we've received this year has been "shovel ready" and I'm getting a bit antsy for a decent accumulation. 

joed wrote:
Pick one or the other based on the size of the area you are planning to use it on.  If for doing driveway, walkways, and sidewalks, get the larger 21-22" SS.  It will get the job done faster with less passes and throw further.  It can better handle deeper and heavier snow.

The 418 should be more suitable for smaller driveways.  It doesn't throw as far, so you're very likely having to double throw the snow.  This will slow the machine down.  Plus, you'll have to make more passes.  In all, the 418 isnt going to be as productive than the larger SS even though it's smaller and more maneuverable.  So you have to decide if having a smaller footprint of the 418 is worth the compromises. 

I wouldn't let the price be the limiting factor for deciding on which snowblowers to buy.  As I recall correctly, you have been looking into a SS for almost two years now, so pick the one that you really like, even if you have to splurge or wait a little longer to save up.  More money spent on a product that gets used more often and you enjoy is still a whole lot more cost effective than the cheaper one that is deficlient.  As for SS, unlike a 2 stage, it is rare that people buy something too big.  And don't be afraid to buy a SS that is capable enough to take over some of the 2 stage duties.    That is a good thing ! 

Get a Toro 221QR, 421QR, or 621QZ.  Do it once, do it right !

Well said, aa335. Buyers remorse sucks so you may as well spend whatever it takes (within reason) to make and keep you happy with your purchase. I think the fact that you plan on buying a brand new machine reinforces this to a much greater degree than if you were buying used. Remember what Confucius say...

Which Confucius saying is that?    "Man running in front of car gets tired, man running behind car gets exhausted"  ?

I'm not a fan of Confucius, but Yoda I am.  :)

I think it goes something like: "You can make the big wok small, but you cannot make the small wok big"...something like that. I just modified it slightly for our little group of OPE fanatics!

I thought it was, "He who go to bed with itchy bum...?"

manjestic wrote:

I'm not goin there.....