Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Need some help.  After 12+ years of no problems with my Toro CCR 2500, I broke her out of hibernation to find out she had no spark.  Tried everything except for a new ignition module, which will cost close to $100 and a few hours of my labor.  Does anyone know of any aftermarket part(s) that could help me resuscitate her.  We have had little to snow here on the plains, but I cant go back to the shovel.

Thanks,

Stone

Could you try pulling the wires from the kill switch, to make sure it's not engaged somehow? I'm sure you know this, but the metal on the spark plug needs to be touching metal on the engine (like the fins) when checking it for a spark with the plug unscrewed from the engine. I'm curious what would change, sitting in storage, to suddenly not get a spark. Mice didn't chew through the insulation on a wire, letting something ground out, or anything like that?

Try replacing the spark plug cap.  If it's a resistor type cap, it may be shot.  I lost the spark on an old Elan Skidoo a while back.  Went through the wiring and found no problems.  I had a few non resistor type spark plug caps left over from my old Yamaha restorations.  I took the resistor cap off the Elan and put on a non-resistor cap and got a nice strong blue spark.   Unless you have some kind of sealed spark plug capl/lead, the spark plug cap just screws on and off. 

You can read the two threads below on abbysguide about spark problems on the Toro's.  Their problems where more related to heat and modules going bad.
But for the price, a new module might be worth a try if you can't find another solution to the problem.  If you do a Google search for either module there are a lot of places
you can buy them.

Sterns Mega Fire ll universal ignition module
for sale on
Amazon.com

http://www.abbysguide.com/ope/discussions/23807-0-1.html
http://www.abbysguide.com/ope/discussions/23807-8-1.html


 Oregon makes a module as well (part #33-053)
for sale on.
Amazon.com

Thanks to all for the feedback.  I read the forums pertaining to the Megafire module and broke down and bought one.  I have to say the schematic accompaning the module isnt very easy to read.  I am no rookie around small engines but this thing is very confusing. Has anyone had any experience with this unit?  I tried to install but still no spark, the other threads pertained to the kawasaki engine and mine is a briggs, i wonder if these can be used on the snowblower.  Thanks again guys.