Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

It think they parked it in a acid bath.  There is 2" of steel missing above the skid bolt holes. Unreal!

That's nothing, around here we have cars that are worse than that! SALT!!!

Either he was hungry or distracted by women of the female persuasion.

Gophers HATE snowblowers.  When you run over a gopher hole it will wake em up from their winter sleep.  And they wake up mean and hungry and they WILL attack!

Dr_Woof wrote:

Then just make sure they run into the bucket when they attack, end of problem. If only the chipmunks would attack my snowblower! I'd love to have a couple hundred less of them around here.

>>>older Ariens 1032 and a Snapper 1030. The Ariens 1032 pro wide tire model is a great machine. That base with a 26-28 inch bucket would be a perfect machine for me. Snapper had several versions of intermediate and heavy duty 1030’s. The top model had dual night lights and wide tires which with chains, no need for tracks, they can go anywhere. All were pretty nice. They all came with the same great cast gearbox. One drive issue was the C clip holding on the string of drive components. Over the years the C clip catch rib would wear down and the clip would fall off. They all had a chain case which seemed to be a carryover from tractors and overkill. For some of the tractor internals it’s easier to removed them from the back.

It is known that Ariens attempted a different painting technique for a few years in the early to mid 80's..
something "new and improved"..(im not sure exactly what it was..might have some early "powder coating" technique or something like that..but im not totally sure)
several years later, this new method was shown to be a failure, as machines began prematurely and radically rusting..
Ariens then switched back, and the problem went away..

looks like this machine falls into the era..
owner care (or lack of care) wasnt a major factor..all buckets rusted just from normal use..
much like the Automobile manufacturers sometimes have a run of "bad paint"..so do the snowblower manufacturers..
and this explains why the rest of the machine looks "normal" for its age, but the bucket is a disaster..
I have seen many photos of rusted buckets from this era, while the machine itself is still functioning normally..
Not sure of the exact years, but its believed to be during the 80's..

the good news is, apart from the rust, the machines from this era are probably in better shape than they look..
only the paint was bad, but not the mechanicals in general..give the machine a new bucket (or strip and re-paint, if its in better condition than
the one in this thread) and you are back in business..and since they look so bad, you can probably get them cheap..

Scot

They call that cancer.  Cars used to rustaway just the same way till they made galvanized one side body metal, and crip and corrosion resistant coatings a reality.  Snow blowrs need to be rinsed and washed constantly if they are used on salt laden snow.  In the early 70's Toyota's and Datsun (now called Nissan) used to look just like that after a few years a salted roads.

I just did some googling on this issue..
Ariens was far from the only one with this problem during this time..
many of the other snowmobile manufacturers, and Auto manufacturers were having the same issues at the same time..
(more like late 80's into the early 90's..not early 80's as I said before)

Turns out it wasnt really their fault..
it was new "environmentally friendly" paints..mandated by the government..

Scot

In my area of New England you could hear those old cars rusting in your driveway. I had rotted frames on several of my older cars when I was young and could only afford old beaters.

The salt they use on the roads here would make a new car look very old in 4-5 years. The new galvanizeed metal makes all the difference now.