Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Shear bolts (pins)
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
royster
" It is the use of power tools that separates man from animals"
Location: New Brunswick, Canada
Joined: Feb 11, 2011
Points: 284
|
|
Shear bolts (pins)
Original Message Nov 16, 2011 5:39 pm |
|
I was just wondering if many operators have had to replace the shear bolts( pins) in their snowblowers. I had an old Craftsman, 32 inch 13.5 horsepower Tecumseh. snowblower that I used for 15 years and had not broken any shear bolts. I took out the old shear bolts a few years ago and found they were badly bent, so I replaced them. I sold it later , it was 18 years old.
This message was modified Nov 16, 2011 by royster
|
stresst
Location: The Village in the Middle of New York
Joined: Dec 11, 2010
Points: 213
|
|
Re: Shear bolts (pins)
Reply #3 Nov 16, 2011 8:29 pm |
|
I was just wondering if many operators have had to replace the shear bolts( pins) in their snowblowers. I had an old Craftsman, 32 inch 13.5 horsepower Tecumseh. snowblower that I used for 15 years and had not broken any shear bolts. I took out the old shear bolts a few years ago and found they were badly bent, so I replaced them. I sold it later , it was 18 years old. If you never hit anything there should be no reason why you would have to chage them. Like someone already stated sometimes the rust solid to the shaft that you dont even need them! LOL
TORO 826OXE
|
mml4
Snow is good, Deep snow is better!
Joined: Dec 31, 2003
Points: 544
|
|
Re: Shear bolts (pins)
Reply #4 Nov 17, 2011 10:31 am |
|
I always walk my property if there is significant snow in the forecast( before the snow starts). Takes a few minutes and saves hours of aggravation. Newspapers are a major PITA!!! Marc
This message was modified Nov 17, 2011 by mml4
SnapperV210P,Toro22177,TroyBilt42010Snowthrower,Craftsman Shredder,American Turbo Pressure Washer HondaGX200,Stihl011Saw,EchoPas260Trimmer Edger,EchoPB602Blower,EchoHCR150Hedge Clipper
|
borat
Joined: Nov 10, 2007
Points: 2692
|
|
Re: Shear bolts (pins)
Reply #6 Nov 17, 2011 1:56 pm |
|
Funny this topic just came up. I was out greasing the augers on the Simplicity and decided to pull the shear pins so that I could spin the auger on the shaft to spread the grease. One came out easily but the other resisted. I drifted it out and It was bent. Auger spun alright albeit they're pretty tight to the shaft. Not a whole lot of play there.
I know I told this story before but.... speaking of newspapers.
We had this real lazy kid about twelve years old who delivered papers and flyers. Our driveways are pretty steep so rather than walk up each driveway or even across from one driveway to the next to deliver, he'd walk up one driveway, (the neighbour's because he subscribed to the paper), then he'd throw a bundle of flyers at my place. Usually they'd land on the driveway in the vicinity of the steps going into the house. Not a big deal if we're home but often we'd be away and return to a yard full of flyers blown all over the place. In the winter, the Simplicity snow blower would turn the flyers into confetti or jam the impeller. In addition to being lazy, he was also deceitful. He'd package numerous copies of the same flyer just to get rid of them. So, often there would be pretty big bundles left in the yard. I tried talking to the kid. Got nowhere with that. Called the newspaper that he worked for. Got lots of lip service but no action.
After nailing another batch of flyers hidden under the snow, I was finally fed up. The kid lived down the street and around the corner from us. So I knew exactly where he lived. I waited for a major snow event and prepared for vengeance. I save up several large bundles of flyers and on the evening of a serious snow storm, I think it was a Friday, I decided to go for a bit of a walk. Stuffed inside my coat were three good size bundles of flyers. The snow was coming down fast and the wind was howling. As I walked by the kid's drive way, I pitched the flyers into the snow and continued on my way. The storm howled all night and into the next morning. By mid afternoon, things had cleared up and the sun was out. We had well over a foot of snow. I cleared the driveway, and went for another walk past the kid's house. Slowing down for reconnaissance purposes, I took a good look toward the kids house. I could see their snow blower in the garage tilted backward and only a couple passes had been made on the driveway. I suspect that the impeller may have been impeded by ingestion of one of the kid's own bundle of flyers.
Now, you'd think that the kid's old man would have kicked his butt for the snow blower being jammed with flyers. Nonetheless, the brat wouldn't change his ways. I finally had to threaten the newspaper with trespassing if they didn't stop the kid from delivering to my house. It wasn't long afterward that we no longer had that kid delivering flyers and I haven't had a problem since. Flyers are no longer delivered and the paper is now delivered to boxes down at the street to home that subscribe.
|
|
|