Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Let me ask a question, suppose you have four snow blowers side by side all the same width, horsepower, etc. What makes one better then the other? Forget plastic chute vs steel, forget the power steering, heated grips, reliability, etc,etc. I am talking about moving snow......will say a 3k Honda have tighter auger clearances and make for moving more snow? Just trying to understand the huge variance in snow blowe prices.

If all machines are side by side with equal output engines will will say 9hp Honda move more snow then say a 9hp craftsman with a Tecumseh?

60 feet Steve??I think your fudging the numbers just a bit.And yes I have seen you on youtube.If thats 60 ft then,I'd like to know what measuring tape you are using.Also someone else questioned your measuring technique that saw your video..So Im not alone....

How well the machine is designed, build tolerance and balance will determine how well it performs. 

If that JD was built by Simplicity and had trouble with end of driveway snow, then I'd say there's something wrong with it.  Probably a slipping belt.   Here's a couple pics of my Simplicity 928 in action I've posted before.  Not quite 60 ft.  More like forty.  My previously owned Craftsman machine would be lucky to throw half that distance.

mikiewest wrote:
This is 20 feet:

http://www.youtube.com/user/SteveCebu?blend=1&ob=5

not that there is anything wrong with that! ;)
but seriously..its 20 feet.

Scot

Thank you all for your reply's! Great thread IMO!

mikiewest wrote:

Yes I know someone questioned it online. I also used a 50 foot tape measure and when that ran out I marked where the tape ended and then I measured to the furthest point that it threw it. This is powder and it's not throwing against the wind. So it stands at 61 feet. I think no matter what I use to measure the distance someone will question how far it is.

So if you have some foolproof way of measuring so that no one will question it I'm listening. For me a tape measure works just fine.

sscotsman wrote:

Yes it's also not the video in question either. That video was very heavy wet snow from this October.

The video where it threw 61 feet was with the chute facing forward is this one. I was out there with the tape measure myself, so I know how far it threw it. It was throwing onto fresh powder so it was real easy to see where the snow was coming down. I got soaked.

http://www.youtube.com/watch?v=va7J5zDk4e0

http://www.youtube.com/watch?v=WJh9bgt3yi8

Looks like 59.867 feet unassisted.  I think the wind helped carry it along to 61 feet. 

aa335 wrote:

You can see the wind what little there was was blowing a bit to the left. I measured it straight on, at 50 feet I was being buried in snow, the outer edge was 61 feet.

I was curious to see how far it was throwing it but this was very light powder. If it had been heavy snow it would not have thrown it that far.

60 feet,    but why is it  so important that the snow is moved this far, wouldn't 30 feet do the job.  I think it is more important how  your snowblower handles the snowplowed snow  at the end of the driveway. However your neighbour might be impressed if he is  down wind, and you are filling up his driveway.

royster wrote:
Sure, 30 feet would get the job done, but why not have a little fun while you're at it.

  Video Link