Finished redoing the dash on my blower
The new Honda 13hp engine I got to repower the blower (again)
was in great shape. Has the electric start and a 10A charging coil.
But it didn't have any of the wiring. No key switch, no rectifier, nothing.
All the factory stuff is way out of my budget so It had to go old school.
With an ignition on/off switch. (The old one that was still on the blower)
And a starter push button. Which meant that I had to rewire the whole
ignition system from the engine to the dash.
That is how things got started.
Then being the way I am, I couldn't just run new wire and leave it at that.
What's the fun it that. Anyway it's finished.
Just need to get a new impeller bearing and flanges and I can put the whole blower
back together and mate it to the tractor.
![](<center> <a href="http://s841.photobucket.com/albums/zz334/rjtrebor/blower%20dash/?action=view&current=8b9b2eec.jpg" target="_blank"><img src="http://i841.photobucket.com/albums/zz334/rjtrebor/blower%20dash/8b9b2eec.jpg" border="0" alt="Photobucket"></a> <br/><br/> </center>)
