Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > How to remove fuel cup on Subaru SX17 engine.

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
a1015


Joined: Nov 5, 2011
Points: 2

How to remove fuel cup on Subaru SX17 engine.
Original Message   Nov 5, 2011 5:56 am
http://robinamerica.com/pfeatures.aspx?pid=200


http://robinamerica.com/media/images/products/200/contentitems/1205_l.png


Anyone know how to remove the translucent fuel cup in the picture above?  Is there a special tool for it?  I think regular pliers or a crescent wrench will
probably break it since its screwed in quite tightly.

This message was modified Nov 5, 2011 by a1015
Replies: 5 - 5 of 5Next page of topicsPreviousAllView as Outline
jrtrebor


Location: Michigan - 3 hours north of Chicago on the lake
Joined: Feb 10, 2010
Points: 539

Re: How to remove fuel cup on Subaru SX17 engine.
Reply #5   Nov 5, 2011 8:15 pm
An open end wrench or an adjustable wrench either one would work.  It kind of doesn't matter how tight it is. If you feel that you have to remove it.  Then put a wrench on it and unscrew it.
The worst that could happen is that it would crack and you would have to buy a new one.  If you don't have to take it off don't take it off. Those cups are always tight because the top
edge of it is seated on a rubber washer.  If you do remove it, before you put it back on. Rub just a thin layer of grease on the edge.
Replies: 5 - 5 of 5Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.