Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Two videos I saw on youtube were very interesting.One was brand new machine out of the box, shiny and all.You can see the cardboard box the machine came in the background.The other one is on the job. The second HS621 has a throttle?That I had not seen before.

http://www.youtube.com/watch?v=IllKHB8Cwls&feature=related

http://www.youtube.com/watch?v=xEPtwuRLryk

Just an FYI: I just went and checked out the old paddles (which are OEM) and they were mounted with the symbols facing inward (not showing).

I am sorry if I caused confusion.

I checked both manuals for HS621 and HS35 and it is from HS35.

I did not see anything about symbols on HS621's manual.

Here is the section where HS35's manual mentions symbols:

I bought the aftermarket paddles a few years ago.  It was cheaper and was softer and more flexible, even with the reinforced cords in the middle.  I think it may be from the same stock of rubber that Toro paddles are made of.  The Honda OEM paddles of course was more expensive, but quite stiffer without the cords.  They do last longer,  the performance was better, especially in slushy condition. 

Changing the paddles were a PITA.  There were too many fasteners.  You need a ratchet/socket on one side, a large flat screwdriver on the other side.  I also don't recall seeing any symbols on the paddles.

aa335 wrote:

Like an O or something similar to that.Also the same symbol on nuts and bolts.I will take a picture of it.

Have you seen this big a snow blower before? I have not, but the video is here:

http://www.youtube.com/watch?v=jxtCntPsOGE&feature=related

http://www.youtube.com/watch?v=fA02SAlOeJU&feature=related

The paddles have an "R" and an "L" stamped into them to denote which side they are to be installed. The middle paddles do not have anything on them except some sort of of alpha/numeric code. It's amazing to see how much wear was on the old ones after installing the new paddles - there's barely any gap between the paddle and the bucket. I compared the new and old paddles by placing one on top of the other and the difference in width was substantial - overall about 1/2". Should produce a huge difference in the throwing ability and overall  peformance. Once again, I wait for a storm to try out my new to me toy!!!!

So are the symbols on the textured side of the rubber?  I can't remember, but looking at the installed rubber augers, all of mine have the textured size towards the metal for better grip. 

Here is a picture showing the way I put the scraper.Is that the right way?

And the picture of symbols on HS35.Apparently the wrong way.:

blumonster wrote:
The metal plates are in the correct position.