Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Hello,

This is my first post here.

I recently got a used old Honda HS35 snowblower for $80.

It starts and runs with choke 'closed'. The choke knob is loose, moves around with the vibration.And when I put the choke on 'open' position it most of the time surges (up and down). I added some seafoam and noticed that it helped it stabilize on that day. I started it again today and it still surges when the choke is 'open' during the first few minutes, then stabilizes. Is this normal?  To start the machine the choke needs to be 'closed' or it won't start.

 This is my first snowblower, I have not worked on a snowblower before.

Auger's rubber parts are not new, the previous owner said he replaced them 3 years ago.It looks like rubber parts are worn by about half an inch maybe.Because I can see where the tip of the rubber was at one point by looking at the very thin end of the rubber.

Scraper bar is not rubber, it looks like it is made from harder plastic and the edges have 3-5 indents froms scraping. Do I have to replace these this year or will they work for now?

Is the price I paid fair for the machine I described above? Is it too much?

Thanks.

I used the Kage paddles today on varying amount of snow, from 2 inch all the way up to 10 inches.  The throwing performance is no better or worse than the stock Toro paddles.  I did notice more vibrations and bumps especially on uneven pavement.  The polyurethane is definitely stiffer and does not absorb bumps as well as the rubber material.  There is noticeably less forward bite.  A couple of times, I lifted the handles to tip the machine forward and got snow blow back under the scraper bar.  Hopefully, this will improve as the paddles wear in more.