After 37 years of using various 2 stage machines, I finally got around to buying a single-stage…..NOT intended to replace the 2 Stage, just to “compliment” it…
As one gets older, it becomes a tad more difficult to handle the bigger machine ALL the time, even when there are lesser amounts of snow.
So, I spent many hours searching thru this forum for help, advice and information on the pros, cons and capabilities of the SS.
You guys may not even realize just how helpful a forum like this can be…..
The various contributions that y’all have made over the years with your posts sit there like an encyclopaedia for anyone willing to do the research.
From your posts I have learned a lot about a SS blower, and now feel more comfortable with my decision to buy one. They appear to be a much more capable machine than I had thought – this I learned from all your links to YouTube which enabled me to see various models “in action”.
Which particular brand I bought was not a big part of my decision making – features, warranty, & price played heavily into my decision – all coupled with my own personal circumstances and how I plan to use the machine…..
The machine that I bought has a 205 cc B & S Snow Series OHV engine with a gross torque of 8.0 T.P @ 3060 rpm. It has both the recoil and electric starters, an on-the-go chute rotation lever from the operator’s position and the quick adjust deflector. The clearing width is 22 inches, the intake height is 12.6 inches and the auger diameter is 10 inches.
The machine has a 4 year warranty – repair only. I paid $500 + tax (Canadian $s)
Just bought it on the weekend and have yet to use it - - here’s hoping that it works like some of the ones I saw in the videos !!
I’ll post some pictures in a follow-up....
Just one question at this time about using a SS – I noticed in a lot of the videos that the operator would release the auger start lever when they were backing up to make another pass – then restart the auger when going into their forward motion…and it seems like most operators did this ALL the time….is there a reason for that ?? Can one not back up while the auger is still engaged ?? (Other than for safety reasons)…
Seems to me that the continual engage / disengage of the auger is unnecessarily hard on the pulleys / belt etc. etc. On a 2 stage, with the auger lock down feature, the auger runs almost continuously…
As I’m anxious to learn the best way to use the SS, and the dos & don’ts, I’d appreciate any feed back on this question.
Cheers = Roger
This message was modified Feb 28, 2011 by ParadiseNfld
Live long & prosper.
