Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Ariens Sno-Thro 924013 Overhaul. Advice welcome.
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
gravron
Joined: Jun 29, 2011
Points: 4
|
|
Ariens Sno-Thro 924013 Overhaul. Advice welcome.
Original Message Jun 29, 2011 3:29 pm |
|
I'm in the process of doing an overhaul/preventative maintenance on an early 1970's vintage Ariens snowblower; in particular, trying to free a "frozen" auger. One half of the auger spins freely on the rake shaft when the shear pins are removed, but the other half of the auger appears to be frozen to the rake shaft from corrosion. I am considering trying to remove the auger and rake shaft assembly from the blower housing, and then dealing with the frozen auger. Any suggestions or advice is welcome.
This message was modified Jun 30, 2011 by gravron
|
|
|