Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Is there something (a part maybe?) missing from the Kohler 8hp horizontal shaft engine?  This BCS tiller always starts on the second pull (even when stored all winter) and it ran for me for a few days but today it started 3 or three times and ran fine but then this last time it would not start. Its not getting gas. I pulled the air breather cover off to take a look at the carb and noticed two shiny fittings that I don't remember seeing (they could have been there before/ i forget things) but  I'm wondering what they are and if they need to be attached to something. This BCS is out in the middle of a field and its a long long push home (in the rain)  if I cannot get it started.  I pulled the spark plug and its bone dry in there.

Are pulleys interchangeable from Kohler to Briggs or other makes?  I need to replace the pulley on this Kohler Magnum 8hp and there are lots of similiar looking pulleys on ebay. Will anything close work or do I need an exact replacement for this part (41 093 10-S kohler). The engine is model number 301585 and serial number is hard to read but something like this: 2012309??2.

Glad to hear the tiller is working... 

Spools or Pullies are not interchangeable,   

If the pully you are changeing is like the one in the picture,  be sure to take a good look at how it comes apart, thereis lots of little parts inside of that type..

Is the old pully broke?

Friiy