Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Nice additions for a Honda EU2000i generator

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
tkrotchko


Location: Maryland
Joined: Feb 9, 2010
Points: 143

Nice additions for a Honda EU2000i generator
Original Message   Feb 8, 2011 6:08 am
I purchased an EU2000i about 3 years ago, don't have many hours on it, and finally got around to changing the oil this past weekend. The only downside to this is that Honda doesn't make it easy to change, since you have to remove the dipstick and then lift the generator to pour it out. While it isn't too heavy, there's no way to do this without making a mess. Doing a little searching, I found an oil hole "extender", which helps both removing oil and adding new oil. Its nicely made of light aluminum, and has a rubber gasket.

Bottom line is this does the job. It moves the oil hole away from the body of the machine, which means you can easily dump the oil out where you want it to go, and more importantly, makes refilling it a 30 second job with no mess. Highly recommended, even if it is pricey.

At the same time, the same gentleman also sells (I think he makes these things?) an aluminum dipstick with a magnet built into it to catch metal shavings in the oil. I've tried running the generator with this dipstick for about an hour, and what I could see what a fine black line of "something" clinging to the magnet. It looked like dirt, but if it stuck to the magnet, it must have iron in it. I will say that unlike what you picture of metal in the oil, you would not be able to identify this as metal from the engine. More like a fine dust.

Bottom line? Questionable. It does something, but its not clear the magnet is really doing enough to justify its cost. However, like the oil filler, its beautifully made of aluminum, and is almost a work of art. I don't see a downside, but perhaps my money would be better spent elsewhere.

http://www.amazon.com/EU2000i-EU1000i-FILLER-MAGNETIC-DIPSTICK/dp/B004D9U2E8
Replies: 1 - 3 of 3View as Outline
snowmachine


Location: Washington State
Joined: Nov 12, 2008
Points: 268

Re: Nice additions for a Honda EU2000i generator
Reply #1   Feb 11, 2011 7:12 am
I have both of these for my two EU2000's. I find the oil tube a requirement. Not sure about the dipstick yet but it is certainly well made. I'm willing to pay for quality.

HTTPs://ouppes.com
FullThrottle


Joined: Feb 11, 2011
Points: 17

Re: Nice additions for a Honda EU2000i generator
Reply #2   Feb 11, 2011 10:24 pm
Only downside from a guy that sells a plastic one if you dont get it in perfect everytime it can wreck the threads on the motor side. Makes sense to me also.  Plastic one cheaper too. On you tube a guy shows how to make a tube out of PVC that slips on. Real cheap if you have a piece laying around. But magnets always good idea for a oil bath systems
tkrotchko


Location: Maryland
Joined: Feb 9, 2010
Points: 143

Re: Nice additions for a Honda EU2000i generator
Reply #3   Feb 12, 2011 8:36 pm
Yeah, absolutely, you screw up the threads, you're in a world of trouble. On the other hand, that's really hard to do, and since he put a gasket on both of them, you don't have to tighten them very much. These things are made very nicely.
Replies: 1 - 3 of 3View as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42