Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Snowblower innovation

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions
Search For:
trouts2




Location: Marlboro MA
Joined: Dec 8, 2007
Points: 1328
Snowblower innovation
Original Message   Jan 4, 2009 7:42 pm
    Below is a Han-Eclipse Giant chute control.  It's the earliest chute back attached chute control I’ve seen.  It’s pretty rugged and even after its many years of age will probably outlast the controls on current Ariens and Toro machines.  I’ve seen a few 4 or 5 year old Ariens machines with the fiber or composite head control gears ¼ to ½ worn away.

Replies: 18 - 19 of 19Next page of topicsPreviousAllView as Outline
steverealty


Joined: Feb 6, 2011
Points: 1
Re: Snowblower innovation
Reply #18   Feb 8, 2011 4:55 am
trouts2 wrote:
Answered Willy in email but for reference: The belt is slipped between the friction disk and it's drive plate. You may have to back off the clutch adjustment to get a bit more clearance.


I'd like the belt replacement info too if you still have it and any other info on this machine. Thanks!
trouts2




Location: Marlboro MA
Joined: Dec 8, 2007
Points: 1328
Re: Snowblower innovation
Reply #19   Feb 8, 2011 8:24 am
steverealty,

    It foils many that the belt can't be slipped out and what you snipped is the way.   I got that from doing it on a Hahn and don't have any manuals or other info.   I've nver been able to locate a Hahn owners or parts manual.
Replies: 18 - 19 of 19Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42