Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

http://snowday.community.officelive.com/default.aspx

borat wrote:
Hmmm........Really don't look like 221 in the picture,.   Look more like ".......heavy equipment........"  (AKA snowshovels)  mentioned in the article lol

Dr_Woof wrote:
Yeah.  I doubt they were doing woodyWW's driveway though. 

Dr_Woof wrote:
It looks like one of the guys lost a contact lens and they're trying to find it.

no big snow here was supposed to get 12-16 inches got about 5-6 tops,not a big workout for the cub so oh well!!!!!!!!!!!!!!

Well, my Toro 221 went though EOD that was over the top of the blower with no issues. Yes it did bog down but never stalled, That thing is a pit bull.
We got 12" of snow and it just powered though it.
I call it the little engine that could. LOLOL!

Feeling pretty good about yesterday's work in clearing up the Greater Toronto Area's supposed best storm in three years and EOD thereof, I thought I would swing by my house at lunchtime today to admire the work of yesterday (first two pics) and the progress of the sun on the snow remnants.

Turns out "Mr. Town Plow" had paid me a visit in the morning.  So the subsequent pics show "how I spent my lunchtime today".  Great weather and great machines.  Dropped in to HD for a take-out meatball sub and looked at the remaining snow machines on the way back to work, so all is well that ends well.

Very impressed with the Ariens' chewing ability.

NotMoneyGuy wrote:

Great Pics!  

Did you have any problems with the Ariens chute clogging? I noticed while I was out that many Ariens owners had their chute unclogging tools out.

How does that Poulan work?

@notmoneyguy

Good deed you done clearing a path for that fire hydrant.  I'm sure the fireman would appreciate that, in addition to not wasting time looking for it buried under 5 feet of snow.  I'm still searching for mine, kinda like searching for survivors after an avalanche.  It's down there somewhere, and I'm close.

I'm also interested on how that Poulan work too.  It's packed with a huge 208cc engine, should have enough oomph to power through.

Steve_Cebu wrote:

Thanks Steve.  The chute is always clean as a whistle, no clogging problems at all so far.  As you can see in the above pics - and this one below- , the rest of the machine and bucket may get snow-cling, but the chute and circular impeller areas are nice and shiny.  I used some quickie high-gloss spray-on Turtle Wax, buffed in with cheese cloth when the machine was assembled.  I plan to do this once in a while to keep things slippery in there.  I also spray WD-40 into the chute and bucket area sometimes - I know I shouldn't as it is a solvent sort of - but will get some Pam or silicone spray and try those later.  For now I'd say car wax works well.