Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I just received this model today and spent quite a while putting it together (mostly due to my own stupidty). However I cannot figure out for the life of me how or where to attach the headlight. The directions in the manual just say to attach it to the bolt on the right side of the dash. But the bolt isn't nearly long enough to hold the headlight on. Most of the pictures I've seen online show the headlight mounted to the front part of the dash not on the side of the frame attached to a bolt. I spent an hour trying to figure this out. If someone could post a picture or explain how to attach it I'd be grateful. I feel so stupid, but I see nothing to fasten it to.

So I finally got the headlight installed properly (thanks to you all). I had originally installed it on the outside.  In any event, that doesn't matter because the light doesn't work! I got the blower at HD in October and just used it last week for the first time.

It was AWESOME, btw -- powered through the slush and guck like it was nothing! I had a little trouble with the area at the end of the driveway that the plows packed in, but I think its because I am short & lightweight -- no leverage to puch it down.

I realized (after I used it) that the light didn't work!  Today, I went out, carefully pulled the cord out of the back of the light and pushed it back in...it clicked, so it should work! I don't know what else to do! Do any of you have an idea of what I can do?

Thanks,

Cheryl

cheryl: Start it up and see if the light works. If not, it might just need a new bulb.