Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

http://snowday.community.officelive.com/default.aspx

Feeling pretty good about yesterday's work in clearing up the Greater Toronto Area's supposed best storm in three years and EOD thereof, I thought I would swing by my house at lunchtime today to admire the work of yesterday (first two pics) and the progress of the sun on the snow remnants.

Turns out "Mr. Town Plow" had paid me a visit in the morning.  So the subsequent pics show "how I spent my lunchtime today".  Great weather and great machines.  Dropped in to HD for a take-out meatball sub and looked at the remaining snow machines on the way back to work, so all is well that ends well.

Very impressed with the Ariens' chewing ability.

NotMoneyGuy wrote:

Great Pics!  

Did you have any problems with the Ariens chute clogging? I noticed while I was out that many Ariens owners had their chute unclogging tools out.

How does that Poulan work?

@notmoneyguy

Good deed you done clearing a path for that fire hydrant.  I'm sure the fireman would appreciate that, in addition to not wasting time looking for it buried under 5 feet of snow.  I'm still searching for mine, kinda like searching for survivors after an avalanche.  It's down there somewhere, and I'm close.

I'm also interested on how that Poulan work too.  It's packed with a huge 208cc engine, should have enough oomph to power through.

Steve_Cebu wrote:

Thanks Steve.  The chute is always clean as a whistle, no clogging problems at all so far.  As you can see in the above pics - and this one below- , the rest of the machine and bucket may get snow-cling, but the chute and circular impeller areas are nice and shiny.  I used some quickie high-gloss spray-on Turtle Wax, buffed in with cheese cloth when the machine was assembled.  I plan to do this once in a while to keep things slippery in there.  I also spray WD-40 into the chute and bucket area sometimes - I know I shouldn't as it is a solvent sort of - but will get some Pam or silicone spray and try those later.  For now I'd say car wax works well.

The chute looks new.  Doesn't the city use salt and sand on the streets where you live?   That stuff will strip the paint off the inside of a metal chute in a few seasons of use.  That's why I put a liner in my Simplicity.  Nothing sticks to that. 

borat wrote:

Both salt and sand, and ice chunks from old, crusty busted-up EOD's coming my way from the town plow.  The machine is fairly new (end of Oct 2010), so hasn't seen that much action yet.  More EOD's than it should have though, kind of like free samples to the neighbours in order to convince them to spring for their own machines.

I like to think that it is a testament to the quality of Ariens' paint and Wisconsin-workmanship skilled application thereof!  Either that or Turtle Wax aren't kidding about the "Turtle" part of their name.  Time will tell.

aa335 wrote:

NotMoneyGuy - Nice job showing that snow who's boss!  The plow man too.  How did you divide the work work load between your Poulan and Ariens?

aa335 - I don't have any experience with the Poulan BUT I can tell you that engine size will not compensate for a poor design.  I had a 7hp Ariens 722 single stage.  It would not move wet heavy snow unless you were blowing it straight ahead.  Once you aimed the chute to the side the snow dribbled out like toothpaste.  Even 4" of wet snow would clog it up.  Everything was set to specs, chute was waxed, and the engine was strong...just didn't work.  The only good thing was that Ariens quickly ended their brief experiment into the single stage arena so not many of these disasters made it to the hands of consumers. 

NotMoneyGuy wrote:

Ok thanks, for all I know other machines are sticking too, it's just yesterday it was like National Ariens day out there.

The stuff was nasty and slushy and half melting more from the salt than the heat as I think yesterday got up to about 23F.

My dealer suggested Pam cooking spray. I tried that once and my chute clogged a bit, now that the Pam has worn off, no clogging. I guess Pam doesn't like plastic. WD-40 is nothing but fish oil and stabilizers, so kinda like unedible Pam.

Wax is kinda hard to put on right now as it's so cold and even inside it's not really melting. I was going to do my EOD but it's only 2 inches and it's not very soft yet, we get less salt up here I guess.

If the Ariens SS is that bad, try over-riding the governor to jack up the power and rotor speed.   Power and velocity can often make up for poor design.