Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

The belt in my Craftsman single stage unraveled so I had to replace it.  During inspection, I noticed that the rear portion of the motor mount had cracked and the engine/crank shaft  had a fair  amount of movement to it which, in combination with higher power being put out likely caused the belt to come apart.   I repaired the motor mount and everything is good and solid again.

The machine takes a 3/8 x 35" belt.   I called Sears and they wanted .... wait for it..... $38.95 plus $7.00 shipping for a belt they claim is 3/8 x 34-3/4" part no. 760928 - 2150.  I suspect the belt on the machine was original equipment.  It had the same part no. 760928 - 2150 printed on it. I went to NAPA and found an FHP belt  for garden equipment coded as a 3L350 which is 3/8 x 35" and fits the machine perfectly.  The NAPA belt was only $6.00.  

Is this a suitable belt?  Will it hold up? 

@borat

Can you post picture of the whole snowblower?  What's the age and who makes it?  Thanks.

aa335 wrote:
It's a Craftsman made by Murray.  I think it's a 1998 model.   I took it out for a test run this morning and it worked great, governor over-ride and all.   It's impressive how much power can be squeezed out of these little 139cc Tecumseh two stroke engines.  The big question is, how long can it last.  Time will tell I guess, but from my experience, most two strokes I've used can take a great deal of rpms/load without letting go.  Just make sure there's lot of oil in the fuel.  I like 32 to 40:1 ratio. 

This Craftsman is one of the underdog models.  They are frequently sold on Craigslist at modest prices.  I've seen videos of them working, it doesn't have the longest throw distance, but they move decent volume of snow.

aa335 wrote:
See that piece of string from the handle going into the housing?   Pull that string and throwing distance is increased three fold.   It's amazing to see what that thing will do at 6000+ rpms.

By the way, I bought that one used real cheap.   I'm still waiting for the Toro lady to drop her ridiculous price to something more reasonable.  Then I'll scoop it up.  In the meantime, I'll be having fun with the Craftsman.  If it lets go, it won't be much of a loss.  I bought it more for something to play with than actually depend on it for serious snow removal.  However, it's been so impressive that I haven't had the Simplicity out in weeks.

Hmmm...and I thought that was a wire for the tachometer.  :)

Looks like you got a little Q-ship there. 

I thought about putting a governor bypass and throttle control on mine, but the last time I played with increasing the top RPM, the engine didn't seem to like the extra RPM.  Too much shaking.

What's a Q-ship?

borat wrote:
It's an ordinary looking car that is stealthily fast. 

I have a similar vintage John Deere TRS21 which was also built by Murray.  The engine is a Tecumseh HSK850.  It looks like you have the original black rivets on the impeller which means you have the original paddle rubber.  For better throwing performance you may want to replace the paddle rubber.  Problem areas include the hose from the primer bulb to the carburetor (hardens and cracks over time) and muffler bolts loosen over time.

borat wrote:
Glad you found some appreciation for single stage.  They can do a lot of work for their size and power.  I find operating them is quite fun, especially on medium weight snow less than the intake height.

The 2 stage also has its place, it makes quick work of heavy crusty snow or when you need to loft the snow a long distance. 

Horses for courses. 

"For better throwing performance you may want to replace the paddle rubber. "

Or, just put a piece of string on the governor control arm.  This thing throws snow when the revs are cranked up.  Probably 20 to 25 feet. 

I really appreciate it's light weight and portability.  If and when necessary, I can haul it down into the basement with ease to work on it.  That alone makes me appreciate single stage machines.