Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Toro Single stage Padles worn by 1/4" not throwing Snow Well
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
edgenet
If you enjoy doing it, It's not work
Location: Toronto
Joined: Nov 27, 2010
Points: 84
![]()
|
 |
Toro Single stage Padles worn by 1/4" not throwing Snow Well
Original Message Jan 21, 2011 11:20 am |
|
I have a 24-Inch Toro single stage The belt is new the engine runs nice The big BUt It's not throwing snow very well. The rubber padales are 1/4" worn. Is it time to replace the padles it has 3 at $50 each a very expensive fix. Model is 38602 if it makes any difference What is the max the rubber paddles wear point. 1/4" or 1/2" to bad they do not mark wear points on the rubber padles
This message was modified Jan 21, 2011 by edgenet
If you are getting paid for what you are doing No matter how much you Enjoy it, It's a Job
|
ratdog
Joined: Jan 17, 2011
Points: 7
![]()
|
 |
Re: Toro Single stage Padles worn by 1/4" not throwing Snow Well
Reply #2 Jan 21, 2011 3:56 pm |
|
Seems a bit expensive when there's one on ebay for $89 (bid price) at the moment. Have you checked around for a better price?
|
lseap107
Location: Wisconsin
Joined: Jan 8, 2011
Points: 23
![]()
|
|
|
Re: Toro Single stage Padles worn by 1/4" not throwing Snow Well
Reply #3 Jan 21, 2011 9:15 pm |
|
I bought 2 new paddles, belt and scraper blade for $60 on Ebay but that was for my 21" and I don't live in Canada
|
|
|
